Instruction manual

VITEK VT-DVR Series
34
5. BASIC PLAYBACK
1. PLAY / STILL / STOP
When the play button is pressed, the DVR starts to play back any recorded data from
the earliest data whether in live or recording mode. After the initial playback of recorded
data, the DVR will resume from where it was left off. When the DVR reaches the end of
the recorded data, it will repeat the playback from the earliest recorded data.
During the playback, the DVR may be played back in reverse, paused, speed search up
to 16 times normal speed, or move field by field using the jog shuttle. Please refer to
the following illustrations for a detailed description.
Press the play button and the play icon will be
displayed. The DVR will start the playback from
the earliest data.
Press the play button once more and it will
change its playback direction to reverse.
Press the still button to pause the playback (Step
button on the remote controller).