Manualshelf

Instruction manual

ManualsBrandsVitek ManualsComputer equipmentVT-4021
31323334353637383940
VITEK VT-DVR Series
30
2. AUTOMATIC SEQUENCE
When the automatic sequence is activated, press a numeric button or switch to 4
channel view mode to start channel sequencing.
If the single channel view is selected, then the channels that are included in the
sequencing will be displayed one after another.
If the 4 channel view mode is selected, then it will maintain the format in sequence.
3. CHANNEL SELECT / REPOSITIONING
On 6, 8 and 13 channel view mode (6 and 8 channel view mode only on 8 CHANNEL
DVR), it is possible to reposition the camera from the bigger window with the one from a
smaller one. The following illustration demonstrates the procedure.
From 6, 8 or 13 channel view mode (13 channel
view mode selected here), press ENTER/CH SEL
button.