Instruction manual

VITEK VT-DVR Series

8) AUDIO-PB

This button allows the synchronization of audio and video during playback.

9) SHUTTLE HOLD

This button allows the user to maintain the selected playback or reverse

playback speed. To select playback speed, rotate the shuttle ring to the desired

playback speed position, then press the SHUTTLE HOLD button to lock the

speed.

10) IR RECEIVER

Do not block the receiver as the remote controller needs the line of sight to the

receiver.

11) POWER

This button turns the unit on or off. The power LED is turned on when the power

is on, and flashes during the initialization and during the shut down.

12) LOCK

This button locks all buttons on the Digital Video Recorder along with the remote

controller. The LOCK LED light is turned on when this feature is activated. To

unlock, press the lock button again and enter the password when prompted.

13) ZOOM

This button allows to digitally zoom into a specific area in both live and playback

screen. Press the button to display the zoom area box, use the arrow keys to

move the box, then press zoom button again to enlarge the selected area.

14) RESTORE

This feature is no longer supported.

15) BACKUP

This button allows backing up onto a blank CD, blank DVD, or external hard

drive. If there are no backup devices present, this button is disabled

automatically.

16) SCHEDULE

This button turns the scheduled recording mode on or off. When the schedule

recording is on, schedule LED will be lit.

17) P/T/Z/FOCUS

This button accesses P/T/Z/Focus control menu.

18) INFO

This button displays system information screen: USB device, USB vendor, USB

disk size, internal HDD size, system version, firmware version, host name and

IP address. Press this button once more to access the system log.