Instruction manual

VITEK VT-DVR Series
122
Set List Manager is used to add or remove individual DVRs.
 Set Name
The set name can be manually entered for an easier identification of an individual
DVR. The DVR Host Name is entered automatically with Auto Scan.
 IP
Enter the IP address or the host address of the DVR. The IP address is entered
automatically with Auto Scan.
 Port
The default port for CMS is 9999. The port is entered automatically with Auto Scan.
 Administrator’s Password
Enter the administrator’s password to access the DVR. The password is entered as
“000000” with Auto Scan.
 Apply
When editing a DVR, click on Apply to put the new settings in effect. Please note
that the DVR set needs to be highlighted.
 Auto Scan
Auto Scan scans for any DVRs connected within the Local Area Network. As it adds
DVRs automatically, it will ignore DVRs already on the list. By default, Auto Scan will
enter the Set Name, IP address, Port, and the password with the default DVR
settings.
 Add To List





  
 