Instruction manual

VITEK VT-DVR Series
118
When the health report window is opened, several blocks will be lit or blinking
depending on the status of the DVR. Please refer to the following chart for the
definition:
Block Color Definition
Solid Red An event or a problem had occurred
Blinking Red Current event or a problem
Solid Yellow Current status of the DVR
 NUMBER
The order the DVR was entered. In case of network connection error or power
failure, this block will blink in red in conjunction with the NAME block.
 NAME
DVR name, either the host name or something created by the user. In case of
network connection error or power failure, this block will blink in red in conjunction
with the NUMBER block.
 HDD FAIL
Notifies Hard Drive Disk failure during the operation.
 SYSTEM FAN LOCK
Notifies the DVR casing fan lock.
 CPU FAN LOCK
Not used at this time.
 ALARM TRIGGER
Notifies the alarm trigger.
 MOTION TRIGGER
Notifies motion detection.
 VIDEO LOSS
Notifies loss of video signals.
 SYSTEM OVERALL TEMPERATURE
Not used at this time.
 CPU OVERALL TEMPERATURE
Not used at this time.
 REC LED INDICATOR
Displays the status of the recording LED from the DVR. Switches to yellow if
inoperative.