VT-HDOC Series 4, 8, & 16 Channel HD-SDI Digital Video Recorders VITEK • 4, 8, or 16 Channel HD-SDI Inputs with Full 1080p Camera Support • Hybrid Operation: Supports HD-SDI, D1, & 960H Analog cameras (8 & 16 Channel Models) • Simple plug and play, point-to-point connection from camera to DVR • VT-HDOC16: 480fps Live Display, Recording & Playback at 720p/1080p • VT-HDOC8: 240fps Live Display, Recording & Playback at 720p/1080p • VT-HDOC4: 120fps Live Display Speed at 720p/1080p & 120fps Recording & Playb
VT-HDOC Series TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. BEFORE INSTALLING ..................................................................................................................... 3 1.1 UPDATING SYSTEM F/W ................................................................................................. 3 1.1.1 WITH A USB THUMB DRIVE.................................................................................... 3 1.1.2 UPDATING FROM THE WEB MENU ..............................................
VT-HDOC Series 7. 6.7.4 PANIC ..................................................................................................................... 52 6.7.5 MISC ....................................................................................................................... 53 6.8 CONFIGURING NETWORK ............................................................................................ 54 6.8.1 IPSETUP ...........................................................................................
VT-HDOC Series 1. BEFORE INSTALLING • Installation should be carried out only by qualified personnel and in accordance with electrical regulations in force. • The DVR must be placed on a stable surface or mounted in an approved cabinet. Adequate ventilation must be provided, taking particular care not to block any of the air vents on the DVR. • Adequate protection against lightning strikes and power surges must be installed to prevent damage to the DVR.
VT-HDOC Series Please avoid updating if the version number of F/W file is lower than the current F/W version. The ‘v1.04D in the file name means the F/W version. 1.1.1.2 Preparing new F/W in the USB thumb driver All the required F/W files should be copied under the ‘dvr’ folder. Refer to the following steps: Plug the USB thumb drive into a PC. Make a ‘dvr’ folder on the root directory on the USB thumb drive. The characters, ‘d’,’v’,’r’, in the folder name have to be in lower case not in capital.
VT-HDOC Series Prepair USB dirve (format in fat32) and create folder with the name “dvr” download updated firmware from http://vitekcctv.com/Downloads.asp into “dvr” folder Cycle the DVR’s power (turn DVR Off then On and boot up) Plug the prepared USB thumb drive in the USB port of DVR. Only the upper USB port in the Front panel of DVR is allowed to update the F/W. Enter the DVR menu and select “SYSTEM” then “MANAGEMENT” Select “F/W UPGRADE” and the following image will display Press and enter ‘Upgrade’.
VT-HDOC Series Click the ‘F/W UPGRADE’ button In ‘F/W Update’ pop-up, click the ‘BROWSE’ button locate and select the firmware. Choose the provided F/W files which has the file extension ‘tar.gz or tgz’. Click the ‘UPLOAD’ button to upload the F/W to the system. After the firmware has uploaded, the system will be ready for the update. Click the ‘START’ button to begin the updating processes. During the update, the progress will be displayed (see below).
VT-HDOC Series System shows the [COMPLETE] when it finish of updating step and reboot automatically. When the whole update is completed, the DVR will restart and be ready to work. Turning off the power in any process of f/w updating cause the damage of the system. 1.2 DESCRIPTION OF FRONT PANEL 1 2 3 4 7 6 10 5 9 12 11 15 8 14 13 19 18 20 16 17 21 23 22 [Front panel of 4 / 8CH HYBRID-DVR] 10. DIGITAL ZOOM Enters digital zoom mode. 11. INFO 2.
VT-HDOC Series •[ ] Back Space, deletes and moves character to the left. Toggles between various multiple displays. 4 channel-splits screen display. 5. FRONT USB 1.1 / 2.0 PORT USB 2.0 ports. Supports functions such as ‘Copy to USB storage’, ‘F/W Upgrade’, Etc. USB 1.1 ports. Supports ‘Mouse Operation’ 6. SPOT MONITOR / ESC • Calls and gets into the main menu. • Returns to previous menu screen. • Exits from various function and menu screens. 7. Tool Bar / UP • Calls and gets into the Tool Bar.
VT-HDOC Series 1 5 2 6 4 3 8 7 11 10 9 [Rear panel of 8ch Hybrid-DVR] 2 1 5 6 4 3 7 8 9 10 11 [Rear panel of 16ch Hybrid-DVR] 1.Power Switch(Only the 4CH HYBRID-DVR) Switch to turn the DVR ON & OFF. 7.RJ-45 Network Port( 1G Base-T) Network port is used to 1G base-T, PC applicatio n software or Mobile application. 8. CVBS Monitor Output Composite video output for the spotlive screen. (B NC) 9.Audio Outputs RCA connectors for theaudio signal outputs. (Line out) 2.
VT-HDOC Series Connect power to the DVR. Press the power button on the back panel of the DVR to power on the DVR. [Logo Image] Initial set resolution is 1024 x 768, so you should use monitor higher than 1024x768 [Loading….] From loading screen display, recording starts according to pre-set condition. When loading, screen could flash odd colors while HYBRID-DVR is processing to optimize display. Hybrid-DVR is ready, automatically log-in and live screen is shown below.
VT-HDOC Series button [Log-In] [live mode of 4 channels] [live mode of 8 channels] 11
VT-HDOC Series [live mode of 16 channels] 3. TOOL BAR You can view the Tool Bar when you move the mouse to the bottom of screen. The Tool bar display will disappear after pre-defined amount of time or exit with exit button ( can set the display time of Tool bar. 3.1 ). In the menu you STATUS DISPLAY You can check current time / Network connection/ USB storage connection/ Auto sequence/ HDD location currently recorded / Audio. : Display current time.
VT-HDOC Series : Shows the selected default audio channel. 3.2 LOG OFF There are two way’s to log off. passed. One is manual log off and the other one is automatic log off after configured time User manually log off or in the menu you can set automatic log off after certain amount of time. [Log-Off by using TOOL BAR] Once Log off is selected as above, current account can be log off. Once user log’s out, you can view the log in window .
VT-HDOC Series 3.4 QUICK COPY MENU POP-UP If you click following icon, instant Backup menu will be pop up. You can save the data 10 minutes from the current time. 3.5 SEARCH MENU POP-UP To search a particular section of recorded footage, click the SEARCH button. To protect unauthorized viewing of footage, only authorized users can playback footage. 3.6 DISPLAY POP-UP You can configure display mode by clicking display button.
VT-HDOC Series [PTZ Controller Screen] 1: Select channel for PTZ control. 2: Display PTZ control parameters which are set under the ‘DETAIL’ of PTZ menu settings 3: Number to configure Preset. 4: Save current screen as Preset. 5: Move to configured Preset Number. 6: Control the value of Zoom/ Focus/ Iris. 7: Move the PTZ camera to Left/ Right/Tom/Bottom 8: Move to the Home position of PTZ camera. 3.8 DIGITAL ZOOM There are two ways to digitally zoom: • Select the Zoom button on the Tool bar.
VT-HDOC Series : You can move Zoom Box : If you press this button, you can control zoom box by 5 levels. Currently Zooming screen.
VT-HDOC Series In full screen mode, you can select the area to zoom in/out by holding down left Mouse button. (Drag), Clicking on the zoomed screen, the display returns to the original screen. Digital Zoom supported in Live / Play mode Digital Zoom supported only in Full screen mode. 3.9 LOG LIST You can view the log list by selecting log list button in Tool bar.
VT-HDOC Series 3 : Log list Items listed in log list.
VT-HDOC Series HDD 1(1 ~ 5) Error For Read HDD 1(1 ~ 5) Fail For Read Network Connected Time Adjust Network Disconnected DVR Watchdog Reset Menu Data Backup Succeeded Menu Data Load Succeeded Menu Data Backup Failed Menu Data Load Failed Camera Menu Changed In Remote PTZ Menu Changed In Remote OSD Menu Changed In Remote Monitor Menu Changed In Remote Sequence Menu Changed In Remote Date&Time Menu Changed In Remote System Management User
VT-HDOC Series Copy Fail Backup Start Backup Stop Power OFF 3.10 PANIC RECORD You can turn on “Panic Record” by selecting the Panic Record button on the Tool bar menu PANIC REC START: Starts the panic record mode. Use the Left mouse click to select. If you turn Panic Record on, recording mode will be changed to the Panic record mode that has already been configured in record menu. Panic record will be stopped after the programmed panic record time has passed. 4. SEARCH & PLAYBACK 4.
VT-HDOC Series EVENT: The recorded data can be searched using the event list. 2 : SEARCH HDD : You can select the HDD to search RECORD: You can search HDD which is selected as Record. MIRRORING: You can search HDD which is selected as Mirroring. 3: CALENDAR: If the data recorded in each date, Blue color will be displayed. If you select the date having the recorded data, you can make a display of recorded data by hour. 4.
VT-HDOC Series : Reverse Fast Play : Reverse Slow Play : Reverse Play : Pause : Play (x1) : Slow Play : Fast Play 6:COPY: You can copy the data to external USB storage. 7: VIDEO WINDOW: Searched video will be displayed 8: Return to live menu from Search Menu 9: HOUR SELECT LINE: You can select the data by hour. If certain time has recorded data, RED color will be displayed.
VT-HDOC Series 4.2.1 BASIC OPERATION If you select the panorama channel, search mode will be changed to PANORAMA Mode. Using front channel key or mouse double click, select channel among 16ch multi-channel. Front key 1 can be chosen for first-left channel among 16ch If you select the date of Calendar, panorama playing back will be started from first recorded data in selected date. If you choose the hour you want, will be displayed in minutes.
VT-HDOC Series : Shows previous panorama. (ex: if currently playback 17~33 sec, then move to playback by 1~16sec) : Shows next panorama. (ex: if currently playback by 1~15sec, then move to playback by 17~33sec) : Select channel to be played back by panorama. 4.3 EVENT SEARCH If you want to search by Event, you need to select date and event menu tab. If you press Event, Event Search will be started from selected start time.
VT-HDOC Series 2: Preview:Events selected in the list displays a preview of the record. 3. Search result: event list displayed. No: Number of event display, recent event display with No.1 DATE/TIME: Display Event triggered time. CHANNEL: Display Event channel EVENT TYPE: Display Event type. Event list display 20 each /page, total 25page(max 500 event) 4: select Event Type which will be displayed in Event list. ALL: Display all events. SENSOR: Display Sensor Event.
VT-HDOC Series TAG NAME: Name file folder of backup. DEVICE: You can select which port of USB to copy to. CHANNEL: You can select which channel to copy. Quick FROM/TO set up: Right click on time bar on time to start the copy from and select START TIME then Right click on time to end copy and select END TIME Copy start: start copy with selected time and condition. Display copy progress status, you can select ‘copy stop’ to stop off loading. 5.
VT-HDOC Series FREEZE ON (pause) : If you press Freeze button, all screen will be stopped. FREEZE OFF : You can release Freeze mode by pressing Freeze Off. PTZ: Selecting PTZ will bring up PTZ control screen. PTZ can only be controlled by an authorized user. PTZ mode will be activated in the channel you selected by mouse.
VT-HDOC Series ZOOM : This opens digital zoom control screen. Zoom mode will be activated in the channel you selected by mouse. Live Audio: Select the live audio channel.
VT-HDOC Series 6. HOW TO CONFIGURE To view the setup menu, press menu button in toolbar. Following screen will be displayed. 6.
VT-HDOC Series 6.1.1 TITLE TITLE: Up to 10 characters can be set by using the virtual keyboard. Double click under TITLE which camera (CH1~CH16) you would like to add a Title for 6.1.2 ADJUST Choose the ‘ADJUST’ menu for setting of video features of camera. You can adjust the video features such as ‘BRIGHTNESS’, ‘CONTRAST’, ‘SHARPNESS’ and ‘SATURATION’ by clicking one of the values for the required channel. Refer to the following pictures. The range of the value for each setting is from 0 ~ 100.
VT-HDOC Series 6.1.3 PTZ ADDRESS: The unique ID of the PTZ device. PROTOCOL: The protocol of the PTZ device. BAUD RATE: The baud rate of the PTZ device. PTZ properties can also be adjusted for each channel by selecting the DETAIL .Auto Focus, Auto IRIS, P/T speed, zoom speed, focus speed, IRIS speed can all be adjusted Note that some settings, such as AUTO FOCUS, may not be compatible with particular PTZ equipment. If this is the case, changing this value will have no effect on PTZ control.
VT-HDOC Series 6.1.4 MOTION SENSITIVITY: Between 1 (Lowest) and 10 (Highest) determines the degree of sensitivity of motion detection required. AREA SETUP: Choosing this option allows the operator to define which areas of the image are monitored for motion detection. Green grid squares represent detection areas, blank areas are ignored. The default is that motion will be detected across the entire image.
VT-HDOC Series To quickly select or deselect the entire grid, use Right mouse click to bring up the motion menu. To select or deselect specific areas, use the left mouse click. Clicking on each cell toggles the cell to be enabled or disabled. By dragging with the left mouse button down, a rectangle area can be selected. Selecting ‘SELECT ALL’ or ‘DESELECT ALL’ after dragging will define the activity of the selected area. Refer to the below picture.
VT-HDOC Series are monitored for privacy. Gray grid squares represent privacy areas, blank areas are ignored. The default is that privacy area will be detected across the entire image 6.2 CONFIGURING DISPLAY To set-up the various display options, Left click on Display icon. 6.2.1 OSD To set-up the various display options, click DISPLAY icon. Configure camera title / boarder/ language here.
VT-HDOC Series or auto off after display time. CAMERA TITLE: Determines whether the camera title is displayed. RECORDING MODE ICON: Determines whether the recording status is shown at the top right of each channel display window. BORDER: Determines whether there is a border around each channel in multi screen display mode. BORDER COLOUR: If the border is ON, you can choose the color. EVENT ICON: Determines whether the event (Motion, Alarm, V-loss) icon is displayed. LANGUAGE: Select the language of display.
VT-HDOC Series OK: press OK button to confirm configured video output. If monitor doesn’t support HD resolution, then configure VGA resolution on HYBRID-DVR. In case HD resolution like 720p/1080p connecting with VGA cable, first connect VGA cable and power on for HYBRID-DVR. Factory default resolution is 1024x 768, so you should use monitor supporting at least 1024 x 768. 6.2.3 SEQUENCE Screen auto switch time can be configured here.
VT-HDOC Series 6.3 CONFIGURING DISK HDD related configuration and operation can be configured here 6.3.1 SETUP You can configure DISK operation like Recording Time Limit / Overwrite / HDD Configuration. OVERWRITE: IF you select “ON”, overwrite mode will be activated. RECORDING TIME LIMIT: You can configure the data from current time to configured time (12hr – 2 month).
VT-HDOC Series RECORD: You can select HDD as record HDD. MIRRORING: You can select HDD as mirroring HDD. S.M.A.R.T: You can view HDD’s current condition GOOD: It shows current HDD condition is good. BAD: It shows current HDD condition is bad. HDD’s S.M.A.R.T information may not be supported depending on HDD. 6.3.2 FORMAT HDD TYPE: You can select HDD type to format. RECORD: format all HDD’s selected as RECORD.
VT-HDOC Series MIRRORING: format all HDD’s selected as MIRRORING. FORMAT: Format the selected HDD type. Device: In HYBRID-DVR, select USB connecting location to format. Device: Select USB processing some USB memory stick and external hard drive cannot be used in HYBRID-DVR, HYBRID-DVR support format function of USB memory stick and external hard drive FORMAT: You can format the USB Device.. HYBRID-DVR, HDD formatting time is different depending on recorded capacity. 6.
VT-HDOC Series TIME FORMAT: Determines how the time is displayed. 24 Hour(Default), AM/PM NETWORK TIME SERVER SETUP: If the HYBRID-DVR is connected to the Internet, you can synchronize the time and date with sever. Default Server: pool.ntp.org ADJUST PERIOD (INTERVAL): Configuration synchronize interval with Network Time server. Network time server synchronization starts after HYBRID-DVR configure power on/operation interval setup.
VT-HDOC Series F/W VERSION: Shows the firmware version of the HYBRID-DVR. H/W VERSION: Shows the hardware version of the HYBRID-DVR. UI VERSION : Shows the UI version of the HYBRID-DVR VIDEO SIGNAL TYPE: The HYBRID-DVR can be selected between PAL and NTSC via a selector HDD NUMBER: Shows the hard drive capacity installed. IP ADDRESS 1(Ethernet Port): Shows either the manual IP address entered in NETWORK setup or the IP address assigned by a DHCP server if enabled.
VT-HDOC Series DVR. VIDEO STANDARD: You can select Video Signal and selected video signal will be adapted as main value automatically. If you change the video signal, reboot HYBRID-DVR . AUTO LOGIN (PASSWORD): Selects if a password is required ‘ON / OFF’. Note) Password must be selected to ‘ON’ if USER MANGEMENT options are required. 6.4.3 AUDIO LIVE AUDIO: If you select “on”, Audio output is available in Live mode.
VT-HDOC Series 6.5.1 ALARM INPUT Configure Alarm input . OPERATION: You can configure activation when Sensor is triggered. DISABLE: When Sensor input is triggered, Event is not working. ENABLE: When Sensor input is triggered, Event is working. TYPE: If the operation is enabled. N/O: Normal Open is Sensor’s normal status N/C: Normal Close is Sensor’s normal status. TEXT: You can name the event 6.5.
VT-HDOC Series ALARM OUT : You can select Relay to be configure OPERATION: You can configure output status of Relay. DISABLE: Relay is not working ENABLE: Relay is working once event is triggered. MODE: You can configure activation of Relay output. TRANSPARENT: Keep Relay output until event triggering stopped. LATCHED: Keep relay output for duration time from the event triggered lately. DURATION: If the alarm output mode is configured as Latched.
VT-HDOC Series MODE: You can configure operation mode of Buzzer output. TRANSPARENT: Keep buzzer output until event operation has stopped. LATCHED: Keep buzzer output for the duration time of event. DURATION: You can configure duration time for buzzer output in latched mode. ALARM: When sensor input, buzzer output will triggered. VIDEO LOSS: When video loss occurred, buzzer output will triggered. MOTION: When motion triggered, buzzer output will triggered. 6.5.4 E-MAIL SETUP .
VT-HDOC Series 6.5.5 PTZ PRESET . PTZ CAMERA: Select the PTZ camera for the following configuration to be applied. OPERATION: You can configure the operation of PTZ Preset, when event is triggered. DISABLE: PTZ preset is not working ENABLE: PTZ preset is working. ALARM PRESET: You can configure Preset when Sensor is triggered. V-LOSS PRESET: You can configure Preset when Video loss has occurred. MOTION PRESET: You can configure Preset, when motion is triggered. 6.
VT-HDOC Series To modify user details, highlight the user with the blue cursor The EDIT screen appears. USER ID: Edit the user ID using the virtual keyboard. (Max 10 characters). PASSWORD: Change the password using the virtual keyboard. (Max 8 characters) Note: To delete the existing password, use the on the virtual keyboard. E-MAIL: Enter the user’s email address if email notifications are required. E-MAIL SEND: Enable or disable email notification for the particular user.
VT-HDOC Series User authority (except ADMIN) can be selected. Search & Play : Right to enter Search Menu/ Instant Play Copy : Right to enter backup menu PTZ Control: Right to control PTZ’s Power OFF : Right to Power Off unit Camera: Right to see camera screen. Detail: to select which cameras the user can view. 6.6.3 LOG-OUT AUTO LOGOUT: Select if auto log-out is ON or OFF. DURATION: If auto log is set to ON, this determines the time.
VT-HDOC Series 49
VT-HDOC Series 6.7 CONFIGURING RECORD Configure various recording options 6.7.1 SETUP SIZE: You can select what resolution of video will be recorded as follows.
VT-HDOC Series 6.7.2 EVENT MOTION EVENT: You can configure recording condition when motion is triggered. ETC EVENT: You can configure recording condition for Alarm / V-Loss. FPS: NTSC: You can configure frame rate as 0 / 1 / 2 / 4 / 5 / 8 / 15 /30 in NTSC Mode or 0 / 1 / 2 / 4 / 5 / 7 / 13 / 25 in PAL mode. QUALITY: You can select 5 recording video qualities Low / Standard / High / Highest / Super. Audio: If you select “ON”, audio data will be recorded.
VT-HDOC Series DAYLY: You can configure the recording type by an hour and by channel. This mode is for the demand that all days have the same recording schedule regardless of the day of the week. WEEKLY: In this mode, you can configure the recording type by an hour, and by channel and by the day of the week. This mode is suitable for the user who wants to configure a separate schedule according to the day of the week. TYPE: You can select recording mode out of 8 modes.
VT-HDOC Series SIZE: You can select what resolution of video will be recorded as follows; Resolution: FULL HD(1080p) : 100% : 1920x1080 / 50% : 1920x544 / 25% : 960x544 HD(720p) : 100% : 1280x720 / 50% : 1280x360 / 25% : 640x360 Analog(SDI) : 100% : 944x480 / 50% : 944x240 / 25% : 472x240 ALL: Set the resolution for all channels The resolution setting value is represented with the ratio of the input resolution to the recording resolution because there could be mixed connection with 720p camera and 108
VT-HDOC Series SELECT CHANNEL FOR MIRRORING: You can check which channel will be recorded to mirroring HDD. 6.8 All: all channel with mirroring record. Channel 1~16: selected channel to record with mirroring. CONFIGURING NETWORK 6.8.1 IPSETUP DHCP: When selected the HYBRID-DVR will obtain an Ethernet IP address automatically if connected to a DHCP server or router. IP ADDRESS: If DHCP is not being used the IP address can be manually set.
VT-HDOC Series HYBRID-DVR PORT: The port number that the HYBRID-DVR uses to support to the remote software. WEB SERVER PORT: The port number that the HYBRID-DVR uses to support remote connection from Internet Explorer or other web browsers. Using Internet router, If connecting more than one HYBRID-DVR, you should configure service port and web service port differently. MAX TX SPEED: Specifies the maximum bandwidth that the HYBRID-DVR can use during a remote connection.
VT-HDOC Series USE DEFAULT SERVER: Selects On or OFF. If you turn Default sever ON, mail will be sent by our own mail server (mail sever). SERVER: The SMTP outbound email server that should be used to send email notifications. PORT: The outbound email port number. SECURITY: Set to OFF if the SERVER does not require a username and password to connect. USER: Enter a username to identify the HYBRID-DVR in email messages. PASSWORD: If SECURITY is set to ON, enter the password here.
VT-HDOC Series Minimum Recommended Windows XP Windows 7 Core2Duo @2.53GHz or Equivalent Core i5 @3.3GHz or Higher 1 GB 2 GB Video Card Memory 512MB 512MB HDD Capacity 50MB 2GB 1280x1024x16 1920x1080x32 DirectX 7.0 DirectX 9.0c Operating System CPU Memory VGA Resolution Direct-X Network Ethernet 10/100B-TX 7.1.1 CONNECT TO WEB SERVER Enter the IP address of HYBRID-DVR into the ULR bar referring to the below picture.
VT-HDOC Series 1: Enter the IP address of your On Cue HYBRID-DVR. If you don’t use the default port number of HTTP, 80, you may add the port number following the IP address. Ex. http://192.168.123.63:80 2: Input the administrator’s password beside of the ‘ADMIN PASSWORD’. Only administrator can log in for the On Cue HYBRID-DVR configuration. Clicking the ‘LOGIN’ button will guide you to the On Cue HYBRID-DVR configuration pages.
VT-HDOC Series 7.1.2.1 Initial Page of Web Configuration 1: Log out from the configuration page 2: version number of this web configuration 3: Top menu of On Cue HYBRID-DVR 4: Sub menu of On Cue HYBRID-DVR 5: Setting or Information section 6: Cancel or applying the modification CANCEL : Ignore any modification and the settings are restored to the previous setting SAVE: The modified setting is applied to On Cue HYBRID-DVR and saved In order to apply or save, you should click the ‘SAVE’ button.
VT-HDOC Series Live View, Search, Playback & Copy functions are not supported from the web server. To user these, please use the ‘Web Viewer’ instead. 7.1.3 WEB VIEWER (Active-X) Through the ‘Web Viewer’, you can see the live, search and playback of recordings in the DVR and copy the recordings from the On Cue HYBRID-DVR.
VT-HDOC Series ‘Searching’ shows the results such as below. Click the ‘ADD TO CHROME’ and then you can see the IE symbol on the right side of URL Bar There are two ways to execute the ‘Web Viewer’ from the Chrome. 1. Click the ICON( ) on the right side of URL bar. It opens new URL bar to get the URL. Entering the required IP address of On Cue HYBRID-DVR will connect the web server. 2.
VT-HDOC Series Select the ‘Open Link in IE TAB’. ActiveX First execution will install the ActiveX plug-in. And the application will be executed if installed already. 7.1.3.2 Initial Screen of Web Viewer Executing the ‘Web Viewer’ opens the application in a separated window from the web browser and display the login window (see image below) . 7.1.3.
VT-HDOC Series : Enter the password for the selected user. The user authority functions (live view, search & playback, PTZ control, etc.), are controlled by the USER AUTHORITY settings in the DVR menu. USER ID and Password are case-sensitive. 7.1.3.4 Live Preview After login, the live preview screen will be shown such (see below).
VT-HDOC Series : Maximize the window : Exit the ‘Web Viewer’ 4: Reconnect/Live & Search / Full Screen : Log out and Reconnect : Switching between the live and search & playback : Full screen video view.
VT-HDOC Series Save to JPEG File: Save the current view of the selected channel with the colored border to the PC as a JPEG file. PTZ Control : Open the PTZ control panel, which controls the PTZ camera of the selected channel. 1: Camera Channel number which is currently selected.
VT-HDOC Series HD SDI DVR Level 1: 720p : 320x180 / 1080p : 480x270 Level 2: 720p : 640x180 / 1080p : 960x270 Level 3: 720p : 640x360 / 1080p : 960x540 Level 4: 720p : 1280x360 / 1080p : 1920x540 Default Value: 640x360 for 720p, 960x540 for 1080p 2: Modify the quality of video (5 steps): LOW,NORAL,HIGH,BEST,SUPER Default Quality: ‘HIGH’ 3: Apply the modification (SET) and close the panel 7.1.3.
VT-HDOC Series : Quad split view 3: Playback speed control : Reverse Fast : Reverse Slow : Reverse Normal Speed : Pause : Forward Normal Speed : Forward Slow : Forward Fast Steps for fast playback : x2, x4, x8, x16,x30, x60, x120 Steps for slow playback : 1/2, 1/4, 1/8, 1/16, 1/30, 1/60, 1/120 4: Fast Playback Speed & Direction Control Bar Mouse wheel up: faster in forward direction Mouse wheel down: reversely faster Center click: normal speed playback Click o
VT-HDOC Series 7: Calendar Panel: Select between RECORD (main HDD) and MIRROR (if setup) Year and Month. The green color indicates that recorded data exists. Clicking the date will trigger the search of the selected day. The search results are displayed on the time selection table (10). 8 : Copy the recorded video in the On Cue HYBRID-DVR to the PC File name: Name of the AVI file being saved.
VT-HDOC Series : Right click on the minute bar will show the pop-up menu : Taking the ‘COPY START TIME’ from the selected time cell and input it into the ‘From’ of COPY control panel. : Taking the ‘COPY END TIME’ from the selected time cell and input it into the ‘To’ of COPY control panel. : Taking the time for ‘EVENT SEARCH start time’. Clicking on the ‘second’ bar will move the second of playback video to the selected second. This is only available while playback is on-going.
VT-HDOC Series Research: execute the event search again 10: Time selection & recording indication table / Event search result window 11: display the playback video as a result of searching. 12: show the current playback mode, speed and direction. 7.2 On Cue Viewer Android / iOS On Cue Viewer is the name of smart phone app. You can access to On Cue HYBRID-DVR system through 3G/4G phone or Wi-Fi connection.
VT-HDOC Series Followed by the main screen 7.2.1.
VT-HDOC Series Input you On Cue HYBRID-DVR information and click Save On Cue HYBRID-DVR Address : You need to input IP Address Port Number : You need to input On Cue HYBRID-DVR port number that you configured at Network menu at ON Cue HYBRID-DVR. User ID : You need to input ID that you configured in On Cue HYBRID-DVR.
VT-HDOC Series Delete : You can delete list currently stored. Connect : You can connect one of List already stored. DVR Admin : You can connect to Web menu of On Cue HYBRID-DVR ( it will be supported in next firmware) after selection one of On Cue HYBRID-DVR in the List. 7.2.1.3 How to connect Select from your On Cue HYBRID-DVR list the unit you want to view than press Connect 7.2.1.
VT-HDOC Series 7.2.1.5 PTZ Control / Capture Image PTZ camera can be control using by using the control as shown below: SET Select the GOTO Allows the camera to move to the selected preset CAPTURE - Will capture an image and save under your photos XExit 7.2.1.6 Net Configuration Adjustments Net Config. tab you will be able to adjust the resolution and quality of the video transmission on your smart device.
VT-HDOC Series 7.2.1.
VT-HDOC Series Now you will be able to select the minutes (00~59) You will be able to see playback (one channel) 76
VT-HDOC Series Return to the previous page Reverse Play – Speed can be selected 2, 4, 8, 16, 32, 64. Reverse Slow playback Pause Fast Forward Slow Play Fast Forward – Speed can be selected 2, 4, 8, 16, 32, 64 7.2.1.8 Disconnect Disconnect This will terminate the connections between the On Cue HYBRID-DVR and your smart device. . 7.3 DDNS SERVER You can get Domain Name Service through DDNS server. 7.3.1 HOW TO REGISTER Input the following URL into your browser: http://ddns.vitekcctv.
VT-HDOC Series ANDROID VIEWER: You can download Android Viewer ( iPocketViewer ). DDNS SERVER: Press the DDNS Server link to go to the DDNS server page. LOGIN ID: Input USER ID. PASSWORD: Input Password. Logon: Press Log-in button to log-in Register: You can create user account. 7.3.2 REGISTER You can create user account by using register menu. LOGIN ID : Create ID. PASSWORD : Create Password.. CONFIRM PASSWORD: Input password again to confirm the password.
VT-HDOC Series 7.3.3 Input On Cue HYBRID-DVR information. You need to register domain name to get the service and input MAC address into DDNS server. 1 : List number of registered On Cue HYBRID-DVR 2 : Mac address of registered On Cue HYBRID-DVR 3 : Domain name of registered On Cue HYBRID-DVR. 4 : IP address of registered On Cue HYBRID-DVR. 5 : Last time that On Cue HYBRID-DVR sent the info to DDNS server. 6 : Update of Last Update 7 : Delete of Domain name registered in DDNS server.
VT-HDOC Series Memory 1 GB 2 GB Video Card Memory 512MB 512MB HDD Capacity 50MB 2GB 1280x1024x16 1920x1080x32 DirectX 7.0 DirectX 9.0c VGA Resolution Direct-X Network Ethernet 10/100B-TX 7.4.1 INSTALLATION You can install the ‘DVR Manager’ using the ‘setup’ program which is provided on the CD. Executing the ‘DVRManager_setup.exe’ on the On Cue HYBRID-DVR viewer folder will initiate the installation.
VT-HDOC Series 7.4.2 EXECUTION After installing the program successfully, a shortcut named ‘OnCue Viewer’ will be created. Clicking this icon executes the OnCue Viewer. : Shortcut and icon of On Cue Viewer 7.4.3 LIVE VIDEO MONITORING The initial window of On Cue viewer is composed of the picture below. 1 : CONNECTION MANAGER: for registering or deleting the On Cue HYBRID-DVR to/from the DVR List. 2 :FULL SCREEN : Fill and fit only the video windows into the PC monitor.
VT-HDOC Series FOLDER SELECT: Choose or make the folder for the data to be copied to. SAVE: Apply and save the current modification. CLOSE: exit the ‘Config’ pop-up. 4 : SPLIT MODE SELECTION: choose the number of cameras which will be shown in the live preview window. 1 / 4 / 9 / 16 / 25 / 36 / 49 / 64 5 : Minimize/Maximize/Close DVR Manager : Minimize the window : Maximize the window : Exit the DVR Manager 6 : Live View Window : show the live video of the connected DVR.
VT-HDOC Series MAC Address :show the MAC address of detected DVRs IP Address: shows the IP addresses of detected DVRs PORT : shows the DVR PORT numbers of the detected DVRs DVR Name: show the DVR name. This is the same as the ‘SYSTEM NAME’ under the ‘MANAGEMENT’ page of ‘SYSTEM’ menu. Re-scan: execute scanning the LAN again. Add : register the selected DVR into the DVR list. Add All : register all the scanned DVRs into the DVR list.. Close: Close the DVR SCAN window.
VT-HDOC Series 7.4.5.2 Swap Camera Position You can swap the display location of selected cameras by dragging and dropping. The swapped camera position will go back to the original location in case that the On Cue HYBRID-DVR manager restarts or the connection is re-established. 7.4.5.3 Digital Zoom on the Live View Area selection by right click of mouse dragging on the desired channel will activate the digital zoom for the specified area for the specified area.
VT-HDOC Series 7.4.5.4 JPEG Snapshot/ PTZ control / Video Configuration /Live Audio You can save live video as JPEG file, control the PTZ of camera, hear the audio from the DVR, and you can configure the live video directly from the viewer. Right-click on the video window to bring up the pop-up menu (see below). : Save the current image (the selected channel with the colored border) to the PC as a JPEG file. : Open the PTZ control panel, which controls the PTZ camera of the selected channel.
VT-HDOC Series 1: Camera Channel number which is currently selected. 2: PRESET OPERATION OF PTZ 3: ZOOM/FOCUS/IRIS CONTROL 4: DIRECTION CONTROL (PAN & TILT) : You can hear the audio from the selected camera. 7.4.5.5 DVR List The ‘DVR List’ shows the DVRs registered using the ‘CONNECTION MANAGER’. On the DVR List panel, you can connect/disconnect the DVR, execute the Player for the remote searching and playback, and see the status information of DVR.
VT-HDOC Series CONNECT: Connect to the selected DVR DISCONNECT: Disconnect the selected DVR RUN PLAYER : Execute the Player for the remote search & playback 7.4.5.6 On Cue HYBRID-DVR Information This panel shows some information of On Cue HYBRID-DVR which is currently highlighted from the DVR List. 7.4.6 PLAYER The Player supports the following features: .
VT-HDOC Series 7.4.6.2 Log In : Enter the USER name of On Cue HYBRID-DVR registered in the On Cue HYBRID-DVR : Enter the password for the selected user. The user authority and allowed functions, live preview, search & playback, PTZ control and etc., by the setting USER AUTHORITY setting of On Cue HYBRID-DVR setup are controlled USER ID and password is case-sensitive. 7.4.6.3 Live Preview After login, the live preview screen will be shown such as below.
VT-HDOC Series The colored rectangle around video shows the currently selected camera 1: Application Title 2: Display split mode selection : Single camera view : Quad split view : 8 Way View : 16 Way View 3: WEB Viewer Minimize/Maximize/Close : Minimize the window : Maximize the window : Exit the ‘Web Viewer’ 4: Reconnect / Live & Search / Full Screen : Log out and Reconnect : Switching between the live preview and the search & playback : Full screen video view.
VT-HDOC Series 7.4.6.4 Search & Playback Toggles between the search & playback window Features User log-in/out feature (RECONNECT) Swiching between the live preview and the search & playback Search & Playback Copy the recordings from the DVR to the PC remotely 1: Application title 2: Split mode selection.
VT-HDOC Series : Forward Normal Speed : Forward Slow : Forward Fast Steps for fast playback : x2, x4, x8, x16,x30, x60, x120 Steps for slow playback : 1/2, 1/4, 1/8, 1/16, 1/30, 1/60, 1/120 4: Fast Playback Speed & Direction Control Bar Mouse wheel up: faster in forward direction Mouse wheel down: fast reverse Center click: normal speed playback Click on the right half of bar : fast forward Click on the left half of bar: fast reverse 7 level speed control for each directi
VT-HDOC Series Copy Start: Begins the copy operation TAG name and Channel have to be defined before user can copy. 9 : Choose search type between ‘EVENT’ and ‘TIME’. The time selection table tagged ‘10’ in the above picture is used for one of this two search type : select the search mode to ‘Time Search’. Yellow colored cell indicates the currently selected hour and minute. Green colored cell means that there is the recording data by the continuous recording.
VT-HDOC Series Event Type(Search Condition) All: For all kinds of recording event Sensor: sensor input event Video Loss: lost video event Motion Detection : motion detection event CH ALL: Searching for all channels CH1/CH2/CH3/CH4: choosing the channel to be searched Research: execute the event search again 10: Time selection & recording indication table / Event search result window 11: display the playback video as a result of searching.
VITEK LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. Digital recording and storage products are also warranted for 3 years except for the hard drives which carry their own independent factory warranty from the hard drive manufacturer.
28492 Constellation Road Valencia, ca 91355 WWW.VITEKCCTV.
