VT-EH Series 4, 8, and 16 Channel Digital Video Recorders with H.264 Compression VITEK • 4, 8, or 16 Video Inputs with 1 Main, 1 Spot Monitor Output and 1 DVI output (VGA compatible with included adaptor) • H.
VT-EH Series DVRs________________________________________________________________________________ IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
VT-EH Series DVRs________________________________________________________________________________ BEFORE INSTALLATION ● Installation should only be carried out by qualified personnel and in accordance with up-to-date electrical regulations. ● The DVR must be placed on a stable surface or mounted in an approved cabinet. Adequate ventilation must be provided, taking particular care not to block any of the air vents on the DVR.
VT-EH Series DVRs________________________________________________________________________________ MAIN FEATURES MOUSE CONTROL Designed to be easily controlled with a mouse. ENHANCED GRAPHICAL USER INTERFACE [GUI] The DVR menu structure and on screen display is presented in a simple to use and logical GUI format. GENUINE PENTAPLEX OPERATION The DVR will continue to record at full frame rate during local playback, local setup, multi user remote viewing and playback and remote setup.
VT-EH Series DVRs________________________________________________________________________________ TELEMETRY CONTROL Full telemetry control is available from the front panel or remote connection and a wide number of speed dome protocols are supported. Protocols can be set individually for each channel and telemetry speed can be adjusted to suit particular speed domes. EXTENSIVE MONITOR SUPPORT The DVR has 2 main monitor outputs (Composite and DVI). One spot monitor output can be programmed in the DVR setup.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM ORGANIZATION 6
VT-EH Series DVRs________________________________________________________________________________ SYSTEM CONFIGURATION 1.
VT-EH Series DVRs________________________________________________________________________________ 1. CAMERA INPUTS Connect up to 16 camera inputs. 2. MAIN MONITOR / SPOT MONITOR OUTPUTS Connect AV monitor instead of VGA output / One spot monitor can be connected. 3. AUDIO INPUTS & OUTPUTS Up to 4 audio inputs and one audio output can be connected. 4. PAL/NTSC SWITCH 5. ALARM INPUTS & RELAY OUTPUT Up to 4 alarm inputs can be connected and configured as high or low inputs with common ground.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM CONFIGURE – Remote Controller 3. Remote Controller description. POWER SETUP: Open System Setup Menu System ON/OFF Channel Selection Buttons ID Button AUDIO: Not Supported Select DVR ID ID ENTER: Apply / Select / Go to Next Screen RETURN Navigation Buttons: Cancel / Deselect Used for Playback Control, Menu Previous Screen Navigation, and PTZ/Focus Control DISP: Change display screen.
VT-EH Series DVRs________________________________________________________________________________ CONNECT & POWER ON • Connect up to 16 CAMERA INPUTS as necessary. • Connect monitors to the DVR using the COMPOSITE or DVI connections. • Connect power to the DVR. The DVR checks for proper power connection and emits two beeps. Press the POWER BUTTON on the front panel of the DVR to begin operation.
VT-EH Series DVRs________________________________________________________________________________ MENU CONTROL All menus can be controlled from the above ‗Status Bar‘ with the mouse or front buttons. LIVE DISPLAY DIVISION SCREEN Select the ‗DISPLAY‖ button for the screen division menu to appear. Select the screen type (1, 4, 6, 8, 9, 16 and rotation sequence). Sequence mode User can select the type from display menu. Press the SEQ button.
VT-EH Series DVRs________________________________________________________________________________ LIVE DISPLAY 1) CAM: Select the Channel. 2) Preset: Input preset numbers 1~255. Click SET to save current view (camera position) as a preset. Click GOTO to move the camera to a saved preset position. 3) Zoom, Focus, IRIS: User can control each item with + or - button. 4) Parameter: Press this button and another window will appear. User can view each item from PTZ parameter menu. .
VT-EH Series DVRs________________________________________________________________________________ LIVE DISPLAY User can see the current log immediately. Click once after selecting log, recorded data will be played. This will appear if you select the ―PREVIEW‖ option. Panic Recording This menu is used to start and stop the Panic recording. If panic recording is started, the record icon will change to a red square with a ―P‖. Select once more to return to previous.
VT-EH Series DVRs________________________________________________________________________________ LIVE DISPLAY Quick Menu User can use quick menu by right-clicking the mouse on each live channel. 1. Freeze On/Off: User can stop the live display of a channel that the user wants. Even though other channels show live display, this particular channel display is stopped. Click once more to return to previous. 2. PTZ Please refer to ―PTZ‖ menu on Page 12. 3. Zoom Please refer to ―ZOOM‖ menu on Page 12. 4.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP Click ―MENU‖ and click the SYSTEM SETUP menu. To navigate around any items in the setup menu, use the CURSOR KEYS and the ENTER and RETURN buttons. In general, the ENTER button is used to select and change a particular item and the RETURN button is used to cancel a change or exit from a particular setup screen. To setup all main system functions, highlight SYSTEM SETUP and press ENTER.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP CAMERA Click the CAMERA menu. CAMERA: CAMERA SETUP To setup the various camera options, highlight CAMERA and press ENTER. TITLE: Input the camera title. COVERT: When it is set to ON, the camera image is not displayed in live display but continues to record. AUDIO: Determines the audio recording channel.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP Click each value with button. The selected channel is displayed in full screen. BRIGHTNESS, CONTRAST, TINT and COLOR can be changed as necessary. To modify a different channel, highlight CAMERA and choose the desired channel. Press RETURN when all changes are complete. CAMERA: PTZ SETUP Click the PTZ SETUP menu and click each value on the ADDRESS, PROTOCOL and BAUD RATE menu.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP Click the ―DETAIL‖ button and change the detail value with VITEK XPRESS button. Note that some settings, such as AUTO FOCUS, may not be compatible with particular PTZ equipment. If this is the case, changing the value will have no effect on PTZ control. Click the ―TOUR‖ button and set the MODE to [AUTO] to use TOUR function. First, please set PRESET number on the live PTZ mode.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP CAMERA: MOTION SENSOR Click the MOTION SENSOR menu and click the value on the SENSITIVITY menu. Change the value with button. SENSITIVITY: Between 1 (Lowest) and 10 (Highest) and determines the degree of motion required before recording is activated. Click the AREA SETUP button.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP DISPLAY To setup the various display options, highlight DISPLAY and press ENTER. DISPLAY - OSD Click the OSD menu. Then click the button for ON/OFF and change the value. STATUS BAR: Determines the time to turn from the menu of status bar to time display. CAMERA TITLE: Determines whether the camera title is displayed.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP DISPLAY: MONITOR Click the MONITOR menu Then click the button for ON/OFF and to change the value. SEQUENCE DWELL: The time each screen is displayed in a sequence operation. SPOT DWELL: The time each screen is displayed on the spot monitor outputs. DE-INTERLACE MODE: When recording any channels in D1 resolution (704 x 576), this should be set to ON to prevent shudder during playback.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP DISPLAY: SEQUENCE Click the SEQUENCE menu. When the SEQ button is pressed, the default sequence will cycle through all channels, one by one. Sequence setup allows the operator to define a custom sequence, using mixed multi screen views and any desired channels. Click the ADD menu. To add a new sequence, highlight ADD and press ENTER.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP Press ADD. Then, ―Sequence Setup‖ menu appears. Determine the ―VIEW TYPE‖ and assign ―CONFIGURE‖. Then, click CONFIRM. To add an additional mode, click ADD. After finishing the setup, press CLOSE. To modify the current one, double click that mode. Then ‗Sequence Setup‖ window will appear again. The new sequence is now saved and can be started by pressing the SEQ button when in live view.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP DISPLAY: SPOT-OUT Click the SPOT-OUT menu and click the camera channel for ON/OFF. The DVR has 1 SPOT MONITOR OUTPUT. User can assign the SPOT OUT display for each channel. Double click the spot out channel that needs to be assigned. SPOT TITLE: input the title. ACTIVATION: Determines ON/OFF. Press MODIFY. (Below is default setup) To modify the current display, double click the display.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP SOUND Click the SOUND menu. To setup the various sound options, highlight SOUND and press ENTER SOUND: AUDIO Click the AUDIO menu and click the ON/OFF menu. Then, click the button for ON/OFF. LIVE AUDIO: When it is set to ON, the selected audio channel can be monitored on the AUDIO OUTPUT. AUDIO MONITORING CHANNEL: Specify which one of the 4 AUDIO INPUTS is routed to the AUDIO OUTPUT.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP SYSTEM Click the SYSTEM menu. To setup the various system options, highlight SYSTEM and press ENTER. DATE / TIME Click the DATE / TIME menu. DATE & TIME: Allows the operator to set or modify the current date & time. DATE FORMAT: Determines how the date is displayed. TIME FORMAT: Determines how the time is displayed.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP SYSTEM: SYSTEM MANAGEMENT Click the SYSTEM MANAGEMENT menu. SYSTEM INFORMATION: User can see the system information as below. F/W version: Shows the firmware version of the DVR. H/W version: Shows the hardware version of the DVR. VIDEO SIGNAL TYPE: The DVR automatically switches between PAL and NTSC depending on the channel 1 input signal at power on.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP SYSTEM NAME: It is used so that notification emails can be identified. F/W UPGRADE: Firmware updates may be released periodically to enhance system performance and add extra features. The operator can upgrade the firmware using a USB memory stick. After inserting the F/W in USB, Press UPGRADE. Then the menu below will appear. After selecting the F/W from F/W list, press UPGRADE.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP USER Click the USER menu. To setup the various system options, highlight USER and press ENTER. USER: USER MANAGEMENT By default, the DVR is configured with a user ID of ADMIN, belonging to the ADMIN group and with a password of 1234. As well as the ability to add new users, existing user details can be modified. To modify user details, highlight the user with the green cursor and press ENTER.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP USER ID: Edit the user ID using the virtual keyboard. PASSWORD: Change the password using the virtual keyboard. GROUP: Users can be assigned to one of three groups - ADMIN, MANAGER or USER. E-MAIL: Enter the user‘s email address if email notification is required. E-MAIL NOTIFICATION: Enable or disable email notifications for the specified user.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP NETWORK Click the NETWORK menu and determine each value. NETWORK: IP SETUP Click the IP SETUP menu. DHCP: When enabled, the DVR will obtain an IP address automatically if it is connected to a DHCP server or router. WEB SERVICE: When enabled, it allows remote connections using Internet Explorer or other web browsers. IP ADDRESS: If DHCP is not being used, the IP address can be manually set.
VT-EH Series DVRs________________________________________________________________________________ HOW TO OBTAIN AN IP ADDRESS One of the easiest ways to obtain an IP address for your DVR is to use the built-in DHCP feature of your DVR. HOW TO SET UP DHCP The purpose of DHCP is to obtain all of the network information from the connected router. In most cases, the best way to do this is to cycle the DHCP feature which means turn it on, then off again.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP NETWORK: DDNS DDNS: When enabled, the DVR can be accessed through a Dynamic DNS server. Commonly used if a broadband connection does not have a static IP address. CAUTION To use the DDNS function, ports 8080 and 554 must be opened. (This is commonly known as port forwarding). a. Default WEB SERVER PORT: 8080 b.
VT-EH Series DVRs________________________________________________________________________________ DVRLINK.NET CONFIGURATION 1) Highlight DDNS Server, and change it to DVRLINK.NET 2) Highlight HOST NAME and press enter. The virtual keyboard will appear. Change the Host Name to your desired name by removing the previous entry--you can do this by repeatedly selecting the key. (When choosing your host name, please don’t include any spaces or special characters).
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP REMOTE ACCESS You can remotely access your VT-EH series DVR in the following ways: 1. The DVR’s MAC address 2. The DVR’s DDNS Host Name (by default this is set to the MAC address) 3.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP REMOTE ACCESS 2. DDNS Host Name The EH series allows you to name your DVR, and access it by that name. Steps to name your DVR 1. Access the DVR‘s main menu by using the remote control, or by using the buttons on the front of the unit. 2. The Setup box will appear. Select ―System Setup.‖ 3. Select ―Network.‖ 4. Select ―DDNS.‖ 5. Make sure DDNS is turned ―ON.‖ 6.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP 3. IP Address If you have a STATIC IP ADDRESS, you can use this to access your DVR. Accessing the DVR REMOTELY To access the DVR remotely via IP address, use the WAN IP address of the network the DVR is connected to. (Sometimes this IP address is referred to as the LIVE, PUBLIC or OUTSIDE IP address) Steps: 1. Bring up a browser (ex. Internet Explorer), and type: http://your.static.ip.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP NETWORK: E-MAIL Click the E-MAIL menu. SERVER: The SMTP outbound email server that should be used to send email notifications. PORT: The outbound email port number. SECURITY: Set to OFF if the SERVER does not require a username and password to connect. USER: Enter your email account PASSWORD: If SECURITY is set to ON, enter the password here. FROM: Input the E-mail address or any text.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP EVENT / SENSOR Click the EVENT / SENSOR menu. To setup the various event handling options, highlight EVENT/SENSOR and press ENTER. EVENT / SENSOR: HDD EVENT Click the HDD EVENT menu. The DVR can monitor the hard drives and detect problems that may be developing. S.M.A.R.T. HDD ALARM: Enables SMART disk monitoring. CHECK INTERVAL: Can be adjusted as desired. DISK FULL EVENT: Determines ON/OFF.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP EVENT / SENSOR: ALARM OUTPUT Click the ALARM OUTPUT menu and click each value. Determines the behavior and actions that will trigger each of the 8/16 alarm outputs. Behavior settings ALARM OUT: Choose which alarm output to configure. OPERATION: The selected alarm output can be enabled or disabled.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP EVENT / SENSOR: BUZZER OUT Click the BUZZER OUTPUT menu and click each value. Determines the behavior and actions that will trigger the internal buzzer. Behavior settings OPERATION: The internal buzzer can be enabled or disabled. HDD EVENT: Determines whether a hard drive event sounds the buzzer.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP EVENT / SENSOR: EMAIL NOTIFICATION Click the EMAIL NOTIFICATION menu and click each value. Determines the behavior and actions that will send an email to a remote user. Behavior settings NOTIFICATION: Email notification can be turned ON or OFF. SETUP CHANGE: Determines whether a setup change sends an email. HDD EVENT: Determines whether a hard drive event sends an email.
VT-EH Series DVRs________________________________________________________________________________ SYSTEM SETUP DISK MANAGE Click the DISK MANAGEMENT menu. To manage the internal hard drives, highlight DISK MANAGE and press ENTER. RECORD TIME LIMIT: In certain circumstances, it may be necessary to limit the amount of footage stored on the DVR (to comply with data protection laws for example). Recording can be limited to 12 hours, 1 day, 2 days, 3 days, 1 week or one month.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU RECORD MENU Click ―MENU‖. Input the password. Then main menu will appear. Click the RECORD SETUP menu. To setup the recording behavior of the DVR, highlight RECORD MENU and press ENTER. RECORD: RECORDING OPERATIONS Click the RECORDING OPERATION menu and click each value. Then, click the value with button to change.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU RECORD: CONTINUOUS/MOTION Click the CONTINUOUS/MOTION SETUP menu. This setup screen allows the operator to configure scheduled and motion detection recording. There are 2 sections: SIZE/FPS/QUALITY: Recording settings for each channel can be defined across a 24 hour period, in blocks (for example between 09:00 and 18:00) or for each individual hour.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU Click the TIME BAR that user wants to have the values changed. Press ENTER to display the green cursor. The green cursor shown represents one hour. The table below the time bar shows the recording settings for this time period. Drag the time that user wants to have the values changed. Example: To change the recording settings between 09:00 and 18:00.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU Click the SIZE, FPS, QUALITY and AUDIO value. Then click the value with button to change. Press ENTER. Recording settings for the selected time period are displayed. SIZE: Recording resolutions of 352x240 (CIF), 704x240 (2CIF) or 704x480 (D1) NTSC can be selected for each channel. FPS: Frame rates between 1 and 30 can be set for each channel.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU ACTIVATION Click the ACTIVATION menu. To change ACTIVATION settings, highlight CONTINUOUS/MOTION RECORDING and press ENTER. Use the CURSOR KEYS to highlight ACTIVATION and press ENTER. The schedule box is highlighted in green. Drag the Time and Channel with left mouse click. After selecting the area, determines the recording type.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU RECORD: ALARM SETUP Click the ALARM RECORDING menu. The setup is the same as CONTINUOUS/MOTION RECORDING. This setup screen allows the operator to configure alarm input activated recording. SIZE/FPS/QUALITY: Recording settings for each channel can be defined across a 24 hour period, in blocks (for example between 09:00 and 18:00) or for each individual hour.
VT-EH Series DVRs________________________________________________________________________________ RECORD MENU RECORD: PANIC SETUP Click the PANIC RECORDING menu. Select the Size, Frame, Quality and Audio. During panic recording mode, the DVR will override all other recording settings and record continuously on all channels at the settings configured here.
VT-EH Series DVRs________________________________________________________________________________ SEARCH SEARCH To search for a particular section of recorded footage, press the SEARCH button. To protect unauthorized viewing of footage, only ADMIN and MANAGER user levels can playback footage. To login as ADMIN, enter the default password of 1234 and press ENTER. SEARCH: TIME SEARCH Click the date that user wants to have the values changed.
VT-EH Series DVRs________________________________________________________________________________ Drag the time bar with left mouse click. Press ENTER to select the calendar and use the CURSOR KEYS to move to the required day. As different days are selected, the timeline display also changes to show recorded footage on that day. Press ENTER to choose the day and move to the timeline.
VT-EH Series DVRs________________________________________________________________________________ SEARCH MODE: PANO PANO (Thumb nail): Each Screen shows 3 hour data. CH1: 0~3 O‘clock CH2: 3~6 O‘clock CH8: 21~24 O‘clock User can select different channels and playback with faster speed of up to x64. SEARCH MODE: Multi Playback PLAY (Multi view): The default playback mode is of a 16 screen display.
VT-EH Series DVRs________________________________________________________________________________ RESERVE: Press this to reserve current data. CONTINUE: Press this to reserve more data. Then display will return to playback. STOP: Make sure to press this button to reserve current data first. Then user can select RESERVE. START: Press this to start the reserve. CLOSE: Finish archiving. Reserved data will be reserved on HDD.
VT-EH Series DVRs________________________________________________________________________________ SEARCH: EVENT SEARCH The DVR event log stores events such as motion and alarm activated recording, video loss, etc. To search for an event and playback the recorded footage, press the SEARCH button and log in as ADMIN with the default password of 1234. Click the SEARCH BY EVENT menu and select each desired channel and condition. Then click the time with button to change. Click the SEARCH button.
VT-EH Series DVRs________________________________________________________________________________ Playback resumes from the moment when the selected event occurred and continues until stopped by the operator. During event search playback, the playback buttons can be used as normal. To stop playback and return to live view mode, repeatedly press RETURN. ARCHIVING NEW ARCHIVING To archive recorded footage to a USB memory stick, press the ARCHIVE button.
VT-EH Series DVRs________________________________________________________________________________ RESERVED DATA MANAGEMENT AVI ARCHIVING LIST: User can see the AVI archiving data that was reserved from new archiving menu or archiving of search. INFORMATION: The detailed information of Reserved AVI data. DELETE: User can delete the reserved AVI data BURN: Backup the selected AVI data.
VT-EH Series DVRs________________________________________________________________________________ FTP SETUP FTP Archiving is possible. User must set up the Host Name, Port number, User Name, and Password with the FTP server. FTP Archiving is possible on New Archiving or Reserved Data Management. DIRECTORY – Archived data will be saved to this user-defined folder on your FTP site. FTP TEST – Tests connectivity to the FTP server.
VT-EH Series DVRs________________________________________________________________________________ HOW TO CONNECT Input the IP Address or URL of the DVR in the Internet Explorer Address Bar. See pages 35-37 for more details. Default ID and password are ‗ADMIN‘ &‘1234‘ User needs to install Active-X, click Run Add-on Windows Internet Explorer In case user is unable to install active-X, User needs to check the option of activeX on IE security menu.
VT-EH Series DVRs________________________________________________________________________________ Select Enable for all ActiveX related options. (Ex: Download signed ActiveX control, Download unsigned ActiveX control….
VT-EH Series DVRs________________________________________________________________________________ Explanation for function LIVE mode Select live division screen (1, 4, 8,9,16 split mode) Sequence mode Move to next camera Full screen Select live channel. – select a channel manually. Activate Mic to send a sound to DVR On/Off Sound from DVR Save the live image Print the current screen Snapshot the current screen Setup [Render] and [Save Folder] • Status: Show active status of DVR 1.
VT-EH Series DVRs________________________________________________________________________________ • Log : Display all system logs with real time • PTZ: User is able to control connected PTZ camera. 1. Pattern – move a camera among several preset positions 2. Preset – set a position of camera view 3.
VT-EH Series DVRs________________________________________________________________________________ SEARCH (By time line) 1. Select a time line on time table or set an exact time. 2. Then press ‗Play‘ button 1. Refresh: Refresh the recording table of data. 2. Play: Start to display the recorded data from system. 3. Backup: User can back up the recorded data on remote site.
VT-EH Series DVRs________________________________________________________________________________ Backup 1. Select the desired Start and End Time 2. Select the desired channel(s) 3. Click Start. By default, the video will be saved to the C:\SaveFolder SEARCH (By Event) 1. Event: Select events for querying. 2. Period: Set duration for querying recording data. 3. Search: Start to query and list up all events on the list. 4.
VT-EH Series DVRs________________________________________________________________________________ SETUP MODE 1. CAMERA User can configure camera‘s attribute such as title, live color, PTZ setup or motion. Motion setup for detecting motion events. 1) Select Motion menu tab. 2) Select a channel and sensitivity. 3) Drag a mouse on the image to select detecting area. 4) Press OK.
VT-EH Series DVRs________________________________________________________________________________ 2. Display 1) OSD –Choose text to display over the image. 2) Monitor - User can set dwell time for sequence or spot, and pop up function.
VT-EH Series DVRs________________________________________________________________________________ 3. Sound 1) Audio Setting – Select a live audio channel and activation 2) Buzzer setting – Activate buzzer out for event notification 4. System User can configure the DATE of the system. Check system information and set controller.
VT-EH Series DVRs________________________________________________________________________________ 5. Recording User can configure the recording parameter. Setting detail is same as system. 6. User To add a User, select Add, then assign Authority level and Log Out time.
VT-EH Series DVRs________________________________________________________________________________ 7. Network User can check the system‘s network information and selectable speed level. IP settings are not allowed to be changed on remote site. Network IP can only be changed from DVR. For email notification, user can input the SMTP server detail as shown below.
VT-EH Series DVRs________________________________________________________________________________ 8. Sensor Management can set all device option of Alarm in/out, Buzzer out for event notification. (HDD EVENT, Alarm Input, Alarm output, Buzzer out, E-mail notification option) All detail setup follow DVR system setup INFORMATION Display Model name of DVR and WEB Remote Software version.
VT-EH Series DVRs________________________________________________________________________________ BACKUP PLAYER To view archives backed up from a DVR, double click BackupPlayer (located in the Player folder). NOTE: When archiving from the web browser to a PC, the BackupPlayer is NOT included. To obtain the BackupPlayer, user must physically archive from the DVR to a USB flash drive. Click to choose which archive file to playback. Playback of the archive file begins.
VT-EH Series DVRs________________________________________________________________________________ 2. Click the [Open file] button and open the backup file. 3. After opening file, select ―Yes‖ to check the watermark. 4. If the backuped AVI file is modified, [Verification failed] message will appear.
VT-EH Series DVRs________________________________________________________________________________ SMARTPHONE CONNECTION iPHONE 1. Select the Safari browser. 2. Enter the IP address or URL to connect. And Click the [GO] button. 3. Enter the User name and Password then use can see the Image.
VT-EH Series DVRs________________________________________________________________________________ BlackBerry 1. Select the Web browser. 2. Enter the IP address or URL to connect. And press the Enter button. 3. Enter the User name and Password then use can see the Image.
VT-EH Series DVRs________________________________________________________________________________ ‘DVR Viewer’ Guide (iPhone / iPad / Android) 1.1 – Install & Connect (iPhone & iPad) 5. Insert IP and ports then save 1. Search and Install ―Vitek DVR Viewer‖ in Apple APPstore 6. Insert ID, Password and login type select (Default: Auto Login) then save ADMIN 2. Run ‗DVR Viewer‘ Application **** 3. ADD Connection List 7. Select DVR in list 4.
VT-EH Series DVRs________________________________________________________________________________ 1.2 – Install & Connect (Android) 1. Search and Install ―Vitek EH DVR Viewer‖ in 4. Insert name, URL, ports, ID, Password and select ID/Password save type then select ‗Save‘ button Android market **** -> 2. Run ‗Vitek EH DVR Viewer‘ Application 5. Long press DVR in list then select Connect button -> 3.
VT-EH Series DVRs________________________________________________________________________________ 2 – PTZ & Snapshot (PRO version) 3 – Log View (PRO version) 1. Touch the ‗PTZ‘ button 1. Touch the ‗log view‘ button 2. Set PTZ by pressing ‗+/-/∧/∨/‘ button. 2. Select start/end time and Filter Option select after touch ‗search‘ button 3. Set Image Capture By using ‗camera‘ Button. 3.
VT-EH Series DVRs________________________________________________________________________________ 4 – Search (PRO version) 5 – Setup (PRO version) 1. Touch the ‗Search‘ button 1. Touch the ‗Setup‘ button 2. Select date/time and touch play button 2. WebRA setup menu and the same settings are available. 3. User can do the playback, rewind, fast-forward and Split Screen Search.
VITEK LIMITED PRODUCT WARRANTY VITEK products carry a limited three (3) year manufacturer’s warranty with the exception of hard drives which carry a five (5) year direct factory* warranty.
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.
