Quick Start Guide

P2P (QR Code Configuration of the Network)
Along with simple scanning QR code in menu, without any setting for IP / Port, IP set up is completed in mobile app. See
below step.
- How to Use –
1. Install the software (“PocketViewer” or
“iPocketViewer”) in your mobile
2. It will display like the left ① screen
when play PocketViewer. Then Click
+New button on DVR List
3. Check “P2P Connection” and Click “QR
code” on ② screen.
-When you check “Use H/W Codec”, It
can be faster streaming speed in low
version mobile phone.
4. After QR code is activated in your
mobile, scan QR code on ③ screen.
5. After scan QR code, it will set up
Network automatically. Click “Save”
button on your mobile and will be
finished.