Product Specs

Document name
Wireless charger product
specifications
document
number
DJ-TECDOC-B85UY
File Properties
technical documentation
version
A1
SHENZHEN SUPERPOSITION TECHNOLOGY CO.,LTD. 16
NO
Test Item
Testing Conditions
reference
standard
TS3.11
flame
retardant test
It will be ignited by the product lighter, including the cable part
and the fuselage part, and observe whether it will automatically
extinguish.
TS3.12
adhesion
test
Draw a small grid (1mm×1mm) on the tested surface with a
sharp blade or a special bagel knife. Each line should be deep to
the bottom of the surface coating. Test the small grid (no
bubbles) with 3M 600 adhesive. Test results level 1 requirements
(a little coating is shed at the switching intersection, but the
cross-cutting area is not significantly affected by more than 5%).
GB9286
ASTM D 3359
TS3.13
Alcohol friction
test
测试
The grinding head cotton cloth is fully soaked with alcohol
(concentration ≥99.7%), a 500g weight is placed on the friction
resistance test machine, and 100 rounds are wiped on the tested
surface, with a speed of 25 cycles/min
GBT6739
ASTM D 3363
7 Storage and transportation
storage temperature：-20℃～70℃
Storage Humidity：10%～95%
8 test report
The attachment is the third-party test report, please refer to the report
for details.
FCC warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a