User Manual

Utilities
52 FS -T2001 Media Recorder
 FORMAT MEDIA – Select the media to be formatted (SxS Card A,
B or the internal Hard Drive) : A, B, C
 FORMAT TYPE – FAT32 or UDF format is available for SxS cards
 VOLUME LABEL – For SxS card, user can either choose to preserve
the volume name of its media (KEEP) or to erase it (CLEAR).
Backup your content before Formatting SxS Card.
During formatting, a FORMATTING label will blink next to the
volume name being formatted.
Format SxS card accordingly to the FS-T2001 format type
If an inserted SxS Card format doesn’t match the selected
FS-T2001 file format selected (FAT/UDF), a white horizontal
bar will be displayed next to the volume name.
UPGRADE
Use this function to upgrade the FS-T2001 firmware.
1. Download the upgrade file from http://www.vitec.com
2. Rename the file to “FST2.bin”. Copy the file to an SxS card.
3. Insert card in FS-T2001 and select UPGRADE.
4. Wait for the upgrade to complete then shut down the unit.
DELETE CLIP
This function allows to delete a single clip from a SxS card/HDD or
a complete archive from HDD. If a complete delete is required for
SxS cards, the format menu must be used.
To access to A,B,C-001 clip or YY archives on HDD, use the right
button next to the wheel. Use the wheel to select a specific clip on
A,B,C.
REPAIR CLIP
Use this function to repair a damaged clip located on a SxS card or
on the internal hard drive. The damaged clip must have been
recorded with the FS-T2001 (damaged clip could be the result of a
loss of power during a recording for example).
After entering this menu, user must select the clip to be repair then
press the OK button.