User Manual

Setup
48 FS -T2001 Media Recorder
PPPPNNNN_01
Take number
EXAMPLE: FST_0001_01.MP4
Default is set to "0001".
TAKE PREFIX
Sets the first part (4-alphanumeric) of clip names on FS-T2001.
PPPPNNNN_01
Take prefix
EXAMPLE: FST-0001-01.MP4 s a clip name with TAKE
PREFIX = “FST_” and TAKE NUMBER = “0001”
Default is set to "FST-".
TC SET
Used to preset the TC (timecode) value on FS-T2001. This value is
available for use by the FS-T2001 immediately after exiting TC SET.
This setting is applicable depending on the TIMECODE mode
selected in OPERATION menu:
 EXT TC – Preset TC value is not used.
 FREE RUN - Preset TC value continuously increments.
 REGEN - Preset TC value is not used.
 REC RUN – Preset TC value is used as the start value for a new
recording.
UB SET
Use to preset the UB (user bit) value for recordings.
TC MODE
Use to set the timecode mode to either DROP frame or NON-
DROP frame (60Hz mode only).