User Manual

Setup
46 FS -T2001 Media Recorder
NTP
If connected to an active network, date and time can by retrieved
using the Network Time Protocol (NTP). In such case select NTP to
set date and time automatically.
Timezone must be adjusted manually prior updating the
date/time via NTP.
DATE
Set the FS-T2001 system to the current date.
The date can be either entered manually or automatically.
TIME
Set the FS-T2001 system to the current time.
TIME ZONE
Select the time zone, where the FS-T2001 is to be used.
It is necessary to select the time zone where the FS-T2001 is to
operate so that other time features accurately display local time.
In addition, DST ADJUST, see below, depends on this setting.
Default is UTC, Universal Time Code.
To set the time zone:
1. Select geographical region, such as America or Asia.
2. Use the Scroll-wheel/4 axis buttons and OK button to locate
and pick a geographical region.
3. Selecting a region displays a list of cities in different time
zones within that region.
4. Use the Scroll-wheel to locate a city located in the same time
zone as the recording session.
5. Press the OK key.
The display returns to the SETUP menu.
DST ADJUST
This preference sets the daylight savings settings on FS-T2001 to
either adjust automatically (based on a set date) or based on
standard or alternative settings. There are three settings:
 AUTOMATIC - The FS-T2001 Series automatically adjusts to and
from daylight savings time. The TIME ZONE must be set to location
of operation.