User Manual
Operations
42 FS -T2001 Media Recorder
REGEN - The timecode recorded comes from the internal timecode
generator on FS-T2001. Timecode only increments when a
recording is in process. The first frame of a new recording will
have a TC value +1 from the last recording on the media.
CLOCK SET – The timecode is calculated from the FS-T2001 clock
time.
FREE RUN, REC-RUN, REGEN and CLOCK SET record modes
ignore the RP-188 timecode in the incoming SD/HD-SDI stream.
These modes are useful when the RP-188 timecode in the SD/HD-
SDI stream is not desired or the source does not support RP-188
timecode.
USERBITS
EXT UB – Recorded UB comes from the SD/HD-SDI input stream.
PRESET – Set recorded UB value to the UB Set in the setup menu.
REC AUDIO
1/2 - When 2-channel audio recording is desired, this setting
records channels 1 and 2 of the embedded SDI audio input.
3/4 - When 2-channel audio recording is desired, this setting
records channels 3 and 4 of the embedded SDI audio input.
1/2/3/4 - When 4-channel audio recording is desired, this setting
records channels 1, 2, 3 and 4 of the embedded SDI audio input.
Note: 4-ch. audio is only possible
TC SUPER
This setting can be used to superimpose the timecode value over the
front panel LCD (during preview/playback), HDMI or/and SDI
video output.
The following settings are available:
TC SUPER – On/Off to enable/disable the TC SUPER function.
SIZE – Three different sizes are available.
POSITION – The TC SUPER can be positioned at the top/center or
bottom of the video.
TRANSPARENCY – Transparency can be used to view the
background content.
VIDEO – TC SUPER can be displayed on the LCD, HDMI or SDI
output (any combination is available).