User Manual

Quick Start

34 FS -T2001 Media Recorder

Accessing the web interface over LAN

To access the web interface, simply type the FS-T2001 IP address in

your favorite web browser (http://IP ADDR)

The IP address of the unit can be found in the SETUP menu under the

IP ADDR setting (refer to the SETUP menu section for more details).

Accessing the web interface over Wi-Fi

To control FS-T2001 over Wi-Fi, please use the VITEC USB Wi-Fi

Adaptor only (reference 14324).

By default, FS-T2001 Wi-Fi is configured in AdHoc mode allowing

direct access from your computer, laptop or mobile device.

Wi-Fi SSID is FST2_XXXX where XXXX are the last four MAC

address digits.

First connection:

1. Switch on the Wi-Fi on your PC / Mac or mobile device.

2. Search for available networks.

3. Select the network called FS-T2001-XXXX to connect to it.

Default configuration

From factory, the device is configured in Ad-Hoc mode and

uses an internal DHCP server to provide the IP address.

The last four digits/symbols of the network name (FS-T2001-

XXXX) conform to the last four digits of the dongle’s MAC

address of the FS-T2001 unit (LAN).

4. Open a web-browser and connect to the device at this address

http://10.0.0.1

5. The default login and password are empty. Just click onto the

6. You are now connected to your recorder!

Wi-Fi setting configuration

Wi-Fi settings can be configured to match your setup.

FS-T2001 cannot be found

It is likely that the unit got reconfigured in Infrastructure

mode.To reset the Wi-Fi network setting, connect to the unit

over LAN and reconfigure the Wi-Fi settings as desired.