User Manual

Quick Start
FS-T2001 Media Recorder 25
7. Files are now accessible and can be downloaded locally on a
computer.
Accessing FS-T2001 clips via SMB/CIFS
FS-T2001 media (SxS cards and HDD) can be mounted as network
drives on a computer. This type of access is particularly interesting
when user wants to review clips or upload only a sequence from a clip
better than a full clip or directory using FTP. The section below
demonstrates how to map a network drive on MAC and Windows OS
but also retrieve clip using XDCAM browser.
Transfer speed over Gigabit Ethernet is up to 30MB/s allowing smooth
playback of a clip from a remote NLE as well as fast ingest.
For MAC:
1. Refer to step 1 to 4 from previous section to connect and
enable the SAMBA server.
2. From the Finder application under MAC, select “Go To” then
“Connect to server”.
3. Enter “smb://” followed by the IP address or the HOSTNAME
of the recorder (can be found respectively in SETUP menu : IP
ADDR / HSTNAME).
4. Click to connect.
5. The computer will locate FS-T2001 and prompt to enter the
chosen login and password (default is fst2 / fst2).
FS-T2001 not detected on network
It is possible that FS-T2001 will not be visible on a network if
WORKGROUP setting does not match the actual configuration
of the network.
WORKGROUP setting can be modified in the SETUP menu.