User Manual

Quick Start
FS-T2001 Media Recorder 13
Basic FS-T2001 Setup
Settings
FS-T2001's menu settings are retained on FS-T2001 even through
power cycles.
Set Date and Time
Prior to utilizing FS-T2001, enter the menu and navigate to the
SETUP menu. From the SETUP menu, set FS-T2001's Date and
Time (as well as Time Zone and DST Adjust if desired).
Operation Menu Setup
Set Control Mode
There are three CONTROL modes available:
 NORMAL - Control the FS-T2001 from its front panel.
Ancillary record data and timecode start/stop in the
SD/HD-SDI input stream is ignored.
 EXTERNAL - The FS-T2001 receives Record and Stop
triggers from ancillary data in the SD/HD-SDI input
stream. This assumes a source that supports ancillary data
is being used.
 TC BREAK - The FS-T2001 monitor's embedded
timecode in the SD/HD-SDI input stream. When a
camera is set to REC-RUN TC mode, recording will
begin on FS-T2001 when timecode is incrementing.
When timecode stops, the recording stops.
NOTE: When this mode is being used, before connecting
The FS-T2001 OPERATION menu
provides the basic settings for unit
operation. The most common unit
settings are found in this menu.
Use the scroll-wheel or Up/Down
buttons to move in the Operations
menu.
OPERATION
MODE
CONTROL
FORMAT
REC MODE
REC MEDIA
REC FORMAT
PSF
REC/PLAY
NORMAL
FAT/MP4
NORMAL
AUTO
HQ MODE
OFF