User Manual

Quick Start
FS-T2001 Media Recorder 7
Powering FS-T2001
Start FS-T2001 unit by pressing the power button. The FS-T2001
LCD boot-up screen immediately appears and, after complete boot
up, the HOME screen appears.
To shut down the unit, press the power button for about 3 seconds.
The FS-T2001 screen display
Home screen
The Home screen displays the configuration and media status of the
FS-T2001 unit.
Media Status
A/B/C respectively corresponds to the SxS Slot A / SxS Slot B and the internal
Hard Drive.
Media which are not in use are dimmed (the remaining media is the one used
for the current or next recording)
In front of each of those drive letters, an icon indicates the media status:
SxS card cannot be used for recording (either it is formatted in an
incompatible file format or it is write protected).
SxS and HDD are ready to use. For SxS cards, this logo indicates that
cards can be safely removed.
Media is in use that should not be removed (SxS). The unit should not
be turned off if this logo appears.
Remaining recording time is provided for each media. If “LOCK” appears next
to A/B, it indicates that the SxS card is write protected.
Timecode / User Bit Display / Headphone Level Options
Using the scroll wheel during record/playback/stop, it is possible to cycle
through the different timecode / user bit modes and Headphone Level options:
Input format
Record time
remaining on media
and media status display
Status
Record Mode
Record File Type
Volume Label and
Track Number of clip
TC/counter display
Input
Clip name
Mode indicator

C- 0002
HD422 – 50Mb/s
TC 1920x1080i/60
00:18:00:08
A: 50 min
B: Lock
C: 180 min
C E
P
SD
MXF
FST_0128
STOP