User guide

CONFIDENTIAL – This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.

LW Player User Guide v2.6 page 49 / 70

- Open configuration file of the board (ActiveProfile.xml) in a text editor

- Search for the strings:

<Property AccessFlags="512" Current="94371840" Default="0" Max="125830200"

Min="0" Name="Info Window Coordinates"/>

- Set values:

<Property AccessFlags="512" Current="0" Default="0" Max="125830200" Min="0"

Name="Info Window Coordinates"/>

- Save the configuration file.

- Reopen the configuration in PlayerLW(m). When the configuration starts an information

window appears in the left upper corner of display.

- Find genlock group in the information window.

- If the board is genlocked the State is LOCKED.

NOTE:

If the board is run in 60fps, Secondary SD-SDI output works not synchronously with Primary HD-

SDI output and mustn’t be used as SDI-synchronisation output or configured as a source for genlock.