User manual

Quick Start
24 FS -T2001 Media Recorder
For MAC:
1. Refer to step 1 to 4 from previous section to connect and
enable the SAMBA server.
2. From the Finder application under MAC, select “Go To” then
“Connect to server”.
3. Enter “smb://” followed by the IP address or the HOSTNAME
of the recorder (can be found respectively in SETUP menu : IP
ADDR / HSTNAME).
4. Click to connect.
5. The computer will locate FS-T2001 and prompt to enter the
chosen login and password (default is fst2 / fst2).
FS-T2001 not detected on netwok
It is possible that FS-T2001 will not be visible on a network if
WORKGROUP setting does not match the actual configuration
of the network.
WORKGROUP setting can be modified in the SETUP menu.
6. Once entered, user can select which media he wants to connect
to (Media A/B refers to SxS cards and Media C to the internal
HDD). Media A/B and C can be all selected at the same time.
7. Network drives are now accessible and visible on the MAC
desktop.
8. Using XDCAM Browser, it is possible to import a full clip, a
part of a clip or just preview clips.
The image above shows how the HDD shows up using
XDCAM Browser under MAC platform.