User manual

Quick Start
FS-T2001 Media Recorder 23
Accessing FS-T2001 clips located on Hard Drive via FTP
FS-T2001 clips stored on the internal hard drive can be accessed via
FTP. This access is recommended for file transfer better than for
mounting FS-T2001 as a network drive on a computer (refer to
Accessing FS-T2001 clips via SMB/CIFS section below).
1. Configure the Ethernet settings of the FS-T2001 in SETUP
menu.
2. Connect FS-T2001 to an Ethernet network and retrieve its IP
address (IP_address)
3. Enable the FTP access in the SETUP menu, SERVER setting
4. Set a password in SETUP, SVR P/W PASS setting. Default is
fst2
For MAC or Windows platform:
5. Use a FTP client on your computer such as Filezilla FTP
a. Enter Host name of the machine: it is the IP address
that can be found in IP ADDR setting.
b. Enter login: fst2
c. Enter Password : refer to 4.
6. Files are now accessible and can be downloaded locally on
your computer.
For Windows platform only:
5. In Explorer window, enter ftp://IP ADDR
6. Enter Login and password.
Login name is defined as fst2, password is user defined (please
see above).
7. Files are now accessible and can be downloaded locally on a
computer.
Accessing FS-T2001 clips via SMB/CIFS
FS-T2001 media (SxS cards and HDD) can be mounted as network
drives on a computer. This type of access is particularly interesting
when user wants to review clips or upload only a sequence from a clip
better than a full clip or directory using FTP. The section below
demonstrates how to map a network drive on MAC and Windows OS
but also retrieve clip using XDCAM browser..