User manual

Quick Start
FS-T2001 Media Recorder 15
Set 1080i Frame Size (HQ Mode Only)
Two HQ 1080i options are available:
 1440 - Sets the HQ (35Mb/s) frame size to 1440x1080
 1920 - Sets the HQ (35Mb/s) frame size to 1920x1080
Set Timecode Mode
Five TIMECODE options are available:
 EXT TC - The timecode recorded comes from the RP188
timecode in the SD/HD-SDI input stream (Default TC
display mode)
 FREE RUN - The timecode recorded comes from the
internal, constantly incrementing free run timecode
generator in the FS-T2001. It is possible to set the TC
value using the TC Set function in the setup menu.
 REC-RUN - The timecode recorded comes from the
internal timecode generator in FS-T2001. Timecode only
increments when a recording is in process.
The first frame of a new recording will have a TC value
+1 from the previous recording.
 REGEN - The timecode recorded comes from the internal
timecode generator on FS-T2001. Timecode only
increments when a recording is in process. The first
frame of a new recording will have a TC value +1 from
the last recording on the media.
 CLOCK SET – The timecode is calculated from the FS-
T2001 time clock.
FREE RUN, REC-RUN, REGEN and CLOCK SET record
modes ignore the RP-188 timecode in the incoming SD/HD-
SDI stream. These modes are useful when the RP-188
timecode in the SD/HD-SDI stream is not desired or the source
does not support RP-188 timecode.
Set Audio Mode
There are three REC AUDIO options:
 Ch 1/2 - When 2-channel audio recording is desired, this
setting records channels 1 and 2 of the embedded SDI audio
input.