VITAMIX® 5200 Owner’s Manual Read and save these instructions Vita-Mix® Corporation 8615 Usher Road Cleveland, OH 44138-2103 U.S.A. 1-800-848-2649 / 1-440-235-4840 www.vitamix.
L E T ’ S G E T STA RT E D Congratulations! You are about to see how quick, easy, and delicious healthy eating can be! We hope that you’ll find the information in this step-by-step guide to be useful and beneficial. The possibilities are endless, and we know you will enjoy your new Vitamix lifestyle! Please read all the safety information, warnings, and instructional material found in this booklet before getting started. Set your Vitamix machine on a dry, level surface.
S E RV I C E & registratio n Vitamix Service Record the model number and serial number of your Vitamix in the spaces provided below for future reference. These numbers can be found on the back of the motor base. Model Number Serial Number Date of Purchase Purchased From Before returning this product for any reason, including repair, first contact Vitamix Customer Service at 1-800-848-2649 or 1-440-235-4840, email service@vitamix.com, or contact your local dealer.
I m p orta n t sa f eg uards warning: To avoid the risk of serious injury when using your Vitamix® blender, basic safety precautions should be followed, including the following. READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATING BLENDER. 1. Read all instructions. 2. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge.
I m p orta n t sa f eg uards 17. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when adding ingredients and when using the tamper. 18. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding and burns. Do not fill container to the maximum capacity. Always begin processing on the lowest speed setting, variable speed 1.
parts & f eat u res 2-Part Lid: Your new machine has our latest lid design. It is easy to put on and take off, and easy to clean. Always use the lid and the lid plug when the machine is in operation. CAUTION: Lids are not interchangeable between different container styles, types, and sizes. Snap the lid onto the container and leave in place for a few minutes. Once the lid has been left on the container, it will be much easier to lock or remove.
parts & f eat u res WARNING Rotating Blades Can Cause Severe Injury. Do not reach into container while machine is running. To Remove the Lid: Lift up on one lid flap while holding the container securely. To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to “unlocked” position and lift out. Container: Ounces, cups, and milliliters are clearly marked. A second dry blade container is available for purchase to grind grain and knead bread dough. The blade is marked “D.
A B O U T T H E B lades The Vitamix machine comes standard with the wet blade container. The blade is identified by a “W” for wet. This blade is used for most of your recipes. Additional containers with wet or dry blades may be purchased separately. WARNING Rotating Blades Can Cause Severe Injury. Do not reach into container while machine is running. W W Wet Blade Container: Designed for processing liquids, including juice, frozen mixtures, sauces, soups, purees, batters, and for wet chopping.
H OW TO U S E T H E tam p er The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot be processed in a regular blender. Using the tamper maintains circulation by preventing air pockets from forming. While the machine is running, and only through the lid plug opening, use the tamper to press ingredients into the blades as you make frozen ice creams and nut butters, or purée fruits and vegetables. WARNING Rotating Blades Can Cause Severe Injury.
co n trol pa n el 2 3 1 1. On/Off Switch: Push up to turn On (|). Push down to turn Off (O). 2. High/Variable Switch: High ( ) is the fastest speed available. Switch to Variable ( all of the lower variable speeds. ) to activate Always make sure that the High/Variable Switch is set to Variable ( ) before pushing the On/Off Switch to the On (|) position. Do not start your machine on High ( ) speed. 3. Variable Speed Dial: Selects many speed settings.
H I N TS FO R S E T T I N G S P E E DS Always start the machine with the left switch down in the Variable ( ) position and with the center Variable Speed Dial on 1. Slowly turn the Variable Speed Dial to the desired speed depending on the recipe used. If a recipe calls for processing on High ( ) , slowly rotate the Variable Speed Dial to 10 and then push the High/Variable Switch up into the High ( ) position. Do not begin processing on Variable 10 or directly on the High ( ) setting.
o p erati n g i n str u ctio n s Wet Blade Container Designed for processing liquids including juice, frozen mixtures, sauces, soups, purees, batters, and for wet chopping. 1. Make sure that the Variable Speed Dial is set to 1. 2. Load the container before placing it on the motor base. Place liquids and soft foods in the container first, solid items and ice last. Although not necessary for blending, you may want to cut or break food into smaller pieces for more precise measuring of ingredients. 3.
o p erati n g i n str u ctio n s Dry Blade Container If purchased, your dry blade container should only be used for hard, dry materials such as grain, and for kneading dough. 1. Make sure that the Variable Speed Dial is set to 1. 2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is inserted through the lid plug opening). 3. With the motor off, set the dry blade container on the motor base by aligning it over the centering pad.
care a n d clea n i n g Container To prepare your new machine for initial use, follow the steps under Normal Cleaning below. This will clean the unit, and break-in the motor. Normal Cleaning: 1. Fill the container half full with warm water and add a couple drops of liquid dish washing detergent to the container. 2. Snap or push the complete 2-part lid into locked position. 3. Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High. 4.
tro u bleshooti n g Automatic Overload Protection Your Vitamix machine is equipped with a special feature: Automatic Overload Protection. This built-in feature is designed to protect the motor and prevent your machine from overheating. That means peace of mind for you as a Vitamix owner. When engaged, this Automatic Overload Protection will cause the motor to shut off and possibly emit a light odor.
Warra n t y 7-Year Full Machine Warranty 1. Product Registration. Vita-Mix® Corporation (“Vitamix”) strongly encourages you to register your purchase by completing and returning the product registration card that came with this Machine. You can register online at www.vitamix.com/warranty; or by calling our Customer Service Department at 1-800-848-2649 or 1-440-235-4840. Failure to register your product purchase will not diminish your warranty rights.
warra n t y 5. What Voids this Warranty. Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal or extreme conditions, or failure to follow the operating instructions will void this Warranty.
N OT E S 18
Notes 19
s p eci f icatio n s Vitamix® 5200 Motor: ≈ 2 peak output horsepower motor Electrical: 120 V, 50/60 Hz, 11.5 A Uses a U.S.A. three–prong grounded cord. Dimensions: Height: 20.5 in. / 52 cm Width: 7.25 in. / 18,42 cm Depth: 8.75 in. / 22,35 cm When applicable: To see the complete line of Vitamix® products, visit vitamix.com. Vita-Mix® Corporation 8615 Usher Road Cleveland, OH 44138-2103 U.S.A. 1-800-848-2649 / 1-440-235-4840 www.vitamix.com ©2012 Vita-Mix® Corporation.
