User's Manual

E01-0002-T01 VS-WI-001-016 V1.0
VitalSigns Technology Co., Ltd
ALL COPY RIGHTS RESERVED
9
Project
Specification and description
LED display
⚫ Boot up : Press and hold the main unit " power button " for
3 seconds, the indicator light flashes green, indicating that
the device has been successfully powered on.
⚫ Connection : Please start the APP, turn on the Bluetooth
function on the smart device and set up the connection
with the host. The indicator light is steady blue, indicating
that the device has been successfully connected.
⚫ Close up : Press and hold the main unit's " power button "
for 3 seconds, the indicator light turns off and goes out,
indicating that the device has been shut down successfully.
1-lead Holter battery
⚫ Built-in lithium battery : 3.7V / 160mAh
⚫ Battery usage : Test mode use time is 24 hours
(Continuously send data to the server)
(Note: new battery)
Product normal working
conditions
This equipment should be placed in a dry, non-corrosive
environment, and no strong electromagnetic field interference.
It should not be worn when swimming or bathing.
Operating environment
⚫ Working temperature：5℃ ~ 40℃
⚫ Working humidity：10% ~ 80%RH，Non-condensing
⚫ Working altitude：70kPa ~ 106kPa, 3000 m
Transportation and storage
environment
⚫ Storage/transport temperature：-20℃ ~ 55℃
⚫ Storage/transport humidity：10% ~ 85%RH，Non-
condensing
⚫ Storage/transportation altitude：70kPa ~ 106kPa
Dimension
⚫ 1-lead Holter : 54*42.96*8 mm
⚫ ECG patch : 130*62*4.4 mm
⚫ Micro-USB Cable : 80*40*12 mm(34+950+25 mm)
Weight
⚫ 1-lead Holter : 8.5 g
⚫ ECG patch : 4.5 g
⚫ Micro-USB Cable : 7 g
Waterproof level
⚫ 1-lead Holter : IP 42