Use Instructions

10
9. Care and Maintenance
Replacing Batteries
Your scale is equipped with a low battery indicator. If the batteries are weak, ‘ ’ will appear in the LCD
Display and the scale will automatically shut off. In this case, replace the batteries with three new AAA-size
alkaline batteries.
Cleaning
Clean the scale periodically using a damp cloth and, if necessary, a small amount of mild detergent.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.
10. Troubleshooting Guide
If the scale encounters an error during measurement, the following is displayed:
Display Cause Remedy
Unknown measurement as it is
outside the user assignment limit
or a unique assignment is not pos-
sible.
Assign unknown measurement in
app or repeat user assignment.
‘ runs across the LCD.
The fat percentage is outside the
measurable range (less than 3 %
or greater than 65 %).
Repeat the measurement barefoot
or, if necessary, moisten the soles
of your feet slightly.
The maximum load-bearing capa-
city of 400 lb (181 kg) was excee-
ded.
The load must not exceed 400 lb
(181 kg).
or incorrect weight is displa-
yed.
No flat, stable surface.
Place the scale on a flat, stable
surface.
or incorrect weight is displa-
yed.
Not standing still. Stand as still as possible.
Incorrect weight is displayed. Scale zero setting is incorrect.
Wait until the scale switches itself
off. Activate scale, wait for ‘0.0 lb’
to
appear and repeat measurement.
No Bluetooth
®
connection
( symbol is missing).
Device outside the range.
The minimum range in a free field
is approx. 82 ft (25 m). Walls and
ceilings reduce the range.
Other radio waves may interfere
with the transmission. Therefore,
do not position the scale near
devices such as WLAN routers,
microwaves, induction hobs etc.
User memory space is full. No
more measurements can be saved.
Open the app. The data is trans-
ferred automatically. This may take
up to one minute.
The batteries in the scale are empty.
Replace the batteries of scale.