Instructions

8
IFU-26 Rev. H | October 2021
Tear Open Pouch
Prepare Chest in Primary Location
Power-On Patch
VitalConnect
Light ashes ON
Press and release
power button
VitalPatch must be placed on the PRIMARY location on
the upper left chest. DO NOT use the SECONDARY
location. See below for more details on the location.
1. Remove VitalPatch from Pouch
Make sure your hands are clean and dry. Tear open the
pouch at the notch and remove VitalPatch.
Note:Wait a minimum of 2 minutes before powering-on
the VitalPatch. You may prepare the chest (next step)
while waiting.
2. Prepare Chest
a. If there is body hair on the site, shave the site before
cleaning. Prepare an area larger than the VitalPatch.
See gure to the right.
b. Clean site with an alcohol wipe and allow to dry.
3. Power-On Patch
a. Place VitalPatch on a at surface.
b. Press and release the power button. See gure to the
right. A green light below the logo ash to let you
know the VitalPatch is powered on (the light will not
stay illuminated).
Section 5: Applying the VitalPatch
Tear at
notch
DO NOT use
Secondary
location
PRIMARY
Location
VitalConnect