TDS

2172 Arendell Way. - Tallahassee, Fl. 32308 844-284-2858 (Toll Free) www.vitalcoat.com
SHINGLE SHIELD™ ROOF SEALER
5. Allow to dry, (minimum 30 min.) and apply second coat thin coat in a perpendicular
or diagonal pattern to the first coat. This will ensure the coverage in areas that may
be missed or may be to thin. Always strive to achieve the recommended maximum
coverage.
CAUTION: Always ensure that you are using the proper gear and fall protection when
on your roof. Consult with a professional installer if needed.
Note* The indicated coverage is calculated for flat surfaces. A porous surface will require more material in order to cover t he
same area. Coverage on shingles varies with amount of deterioration of the substrate.
Curing:
Do not touch treated surface during curing. Do not add water or allow water to come in
contact while curing. Protect surface from debris coming in contact with surface while drying.
Note* Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and
relative humidity.
Clean-up
Clean all application equipment with a specified cleaner. Once the material hardens, it can
only be removed mechanically. If the product splatters, wash thoroughly with hot soapy
water.
Roof Care/Maintenance
Follow the below guidelines to maintain your Shingle Shield™ Pro Roof Sealer protected roof:
1. Perform routine inspections. - Inspections should be made at least twice a year. Once
in the spring and once in the fall. Spring inspections help identify any winter damage
from ice or snow. Fall inspections identify any repairs needed for the upcoming
winter. Always inspect your roof after major storms that could affect the roofing
system.
Coverage/Thickness
Coverage (First Coat)
200-250 ft²/gal
Coverage (Second Coat)
300-450 ft²/gal
Drying/Cure Times
Pot Life
72 Hours @77° (25 C°)
Tack Free Time @77°F 50% RH
.5 – 1 Hour
Min/Max Recoat Time @77°F 50% RH
1-2 Hours
Dry to Touch
1 Hour
Water Resistant
24 Hours
Full Cure
72 hours