TDS

ManualsBrandsVital Coat ManualsBuilding materials1 Gal. Clear Matt 100% Acrylic Shingle Shield Roof Coating for Rejuvenating Asphalt, Fiberglass and Clay Shingles

Shelf Life

This product has a shelf life of up to one year in its original, sealed, unopened container prior to any activator or catalyst being added.

If product appears to be hardened or separated contact Vital Coat before use.

Description

Primary Applications

Vital Coat Shingle Shield is a two part Water Based Solution Copolymer. This environmentally friendly polymer bonds quickly to

create a durable protective coating that can be applied to many types of roofing materials. Vital-Coat Shingle Shield will provide a

water resistant layer that will help extend the life of your shingles. The finished look of Vital-Coat Shingle Shield leaves a clear,

beautiful sheen that can be cleaned with detergents and cleaners with no impact to the coating.

Appearance

Vital Coat

Shingle Shield Roof Sealer

Technical Data Sheet (TDS)

*Helps Extend the Life of the Shingles

*Water Resistant Finish

*Provides a Protective Coating that Resist Water

*Mold and Mildew Resistant

*Seals Minor Holes to Prevent Leaks

*Non Yellowing

VOC Content

Re-Coat Time

Clear to translucent solution

Dry to Touch

Mild

50°F - 85°F

72 hours

<50g/L

2 hours

The coverage rate will vary depending upon surface porosity and application method use. The typical range is approximately 300 to

400 sq. ft. per gallon per application. Two applications are recommended with approximately 350 to 450 sq. ft. per gallon coverage on

second application . Avoid excessive build up.

Coverage

Packaging

This product is available in 1, and 5 gallon containers. Other quantities available upon request.

1 to 2 hours

Odor

Vital Coat Shingle Shield is an excellent alternative for extending the life of your roof shingles. Especially shingles that are

experiencing excessive deterioration.

Features/Benefits

Technical Information

Note*Higher temperatures will speed up activation time and decrease the pot life of our component products. For every additional 10 degrees in temperature, your coating's pot life will generally decrease by half. The ideal temperature for use is 80

°F.

*Excellent Adhesion

*Reduces Granule Loss to Help Increase the Life of the Shingles

Result

Property

Solids

20.00%

Application Temperature

Pot Life after Mixing Part A with Part B

Summary of content (2 pages)

PAGE 1
Vital Coat Shingle Shield Roof Sealer Technical Data Sheet (TDS) Description Vital Coat Shingle Shield is a two part Water Based Solution Copolymer. This environmentally friendly polymer bonds quickly to create a durable protective coating that can be applied to many types of roofing materials. Vital-Coat Shingle Shield will provide a water resistant layer that will help extend the life of your shingles.
PAGE 2
Directions for Use Surface Preparation: Surfaces must be dry, structurally sound, free of loose or deteriorated shingles, free of mold and mildew, and free of dust, dirt, and all other contaminants. Do not apply if rain is in the forecast within 24 hours. Mixing: Separate the Vital Coat Activator (Part B) from Vital Coat Shingle Shield Sealer (Part A) and make sure you have all components required. Mix the entire contents of (Part A) into an appropriate size container for mixing.