Use and Care Manual

Vital Coat Enhance & Seal Penetrating Sealer
Revision Date
_____________________________________________________________________________________________
_____________________________________________________________________________________________
1
Page 5 / 10
Conditions for safe storage, including any incompatibilities
Storage Conditions
Conditions for storage rooms and vessels:
Observe local/state/federal regulations.
Advice for storage of incompatible materials:
Observe local/state/federal regulations.
Further information for storage:
Store in a dry and cool place. Protect against sun. Protect against frost.
Minimum temperature allowed during storage and transportation:
10 °C (50 °F)
Do not allow this material to freeze.
Maximum temperature allowed during storage and transportation: 40 °C (104 °F)
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region-specific regulatory bodies.
Appropriate engineering controls
Engineering controls
Ventilation:
Use with adequate ventilation.
Local exhaust:
If spraying or other aerosol generating operations are performed, local exhaust ventilation
designed to capture mists and sprays, such as a paint spray booth, is recommended.
Individual protection measures, such as personal protective equipment
Eye/face protection
Use safety eyewear with splash guards or side shields. Use additional eye protection such
as chemical safety goggles when the possibility for eye contact from splashing, spraying
liquid, or airborne material exists.
Skin and body protection
Avoid Contact with product. Wear appropriate protective gloves and clothing to prevent
skin
exposure. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching gloves outer surface) to avoid skin contact with this product.
Respiratory protection
No protective equipment is needed under normal use conditions. If spraying or other
operations which generate an aerosol mist are conducted
, wear an appropriate, properly
fitted respirator (NIOSH/MSHA) until vapors are exhausted. Observe OSHA standard 29
CFR 1910.134 and ANSI Z88.2 requirements whenever workplace conditions
require
respirators
use If exposure limits are exceeded or irritation is experienced, ventilation and
evacuation may be required.
General hygiene considerations
Handle in accordance with good industrial hygiene and safety practice.
General
- When using do not eat or drink. Wash hands with soap and water before breaks
and at the end of each workday.
Contaminated Equipment
- Avoid contact with contaminated clothing and protective
gear/equipment. Wash before reuse.