Use and Care Manual

Vital Coat Enhance & Seal Penetrating Sealer
Revision Date
_____________________________________________________________________________________________
_____________________________________________________________________________________________
1
Page 3 / 10
4. FIRST AID MEASURES
Description of first aid measures
General
Information
Get medical attention if irritation or other symptoms occur. Before seeking medical
attention remove contaminated clothing and
shoes. Take a copy of the Safety Data Sheet when going for medical treatment
Inhalation
Move affected person to fresh air. If breathing has stopped, administer CPR. If the person
vomits, clean the
airway and tu
rn their head to the side to prevent choking. If the person is
unconscious but breathing, place them stably
on their left side in the recovery position.
Never give anything by mouth to an unconscious person. Seek immediate
medical attention.
Eye contact
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper
eyelids. Consult a physician.
Skin contact
Remove any contaminated clothing. Rinse skin thoroughly for 15 minutes with plenty of
water or with water and soap.
Ingestion
Rinse mouth with water to remove any residual chemical. If the person vomits, clean their
airway and turn
their head to the side to prevent choking. DO NOT induce vomiting and
DO NOT give them anything to drink unless
directed to do so by a physician. If the person
is unconscious but breathing, place them stably on their left side in
recovery position.
Never give anything by mouth to an unconscious person. Seek immediate
medical
attention.
Most important symptoms and effects, both acute and delayed
Symptoms
No information available.
Indication of any immediate medical attention and special treatment needed
Note to physicians
Treat symptomatically. No Specific antidote available
5. FIRE-FIGHTING MEASURES
Flammable Properties:
Property:
Flash Point…………………
…..
Boiling Point/Boiling Rang…
Lower Explosion Limit (LEL)..
Upper Explosion Limit (UEL)..
I
gnition temperature………..
NFPA Hazard Class
(comb./flam.liquid)
Suitable Extinguishing Media
Value: Method:
>93° C(>199°F) (ASTM D3278, DIN 55680, ISO 3679)
Not determined
Not determined
Not determined
Not determined
IIIB
Material does not burn. Use extinguishing measures appropriate to the source of fire
Large Fire
CAUTION: Use of water spray when fighting fire may be inefficient.
Unsuitable extinguishing media
Do not scatter spilled material with high pressure water streams.