Use and Care Manual

2
www.edenarbors.com
1
Layout the horizontal spindles with all the routed holes inline
as shown and insert the 11 vertical spindles through them.
Insert the two horizontal rails onto the vertical spindles as
shown. Excessive force should not be used.
Finish the assembly by inserting the two posts onto the rail
ends as shown. Note the tabs on the horizontal spindles;
once inserted, the spindles will lock into place.
Fasten the posts onto the horizontal rails using a total of
eight screws through the pre-drilled holes on the post.
1
2
3
4
STEP ONE
2
The Camden Privacy Screen
Privacy Screen Assembly
3
4