Installation Guide

Pergola Additional Materials List
Hardware (in plastic bag)
NOTE: WE HAVE INCLUDED 10% EXTRA SCREWS
BEYOND WHAT IS IDENTIFIED BELOW.
All Screws Included with this Kit are Self-Auguring.
A. Vinyl Weld Glue (1)
B. 3/4” Self-Auguring Stainless Steel Screws (40) (for Rafter Brackets)
C. 3“ Self-Auguring Stainless Steel Screws (49) (for Shade Slates)
D. 4” Self-Auguring Stainless Steel Screws (64) (to secure Beams and Rafters to Posts.)
Extra Materials You will Need
(Purchase separately from www.newenglandarbors.com or retailer of our products)
If Mounting Pergola on Concrete or Wood Deck
J. 4x4x4 Pressure-Treated Wood Posts (4)
(purchase at local building center)
K . 4x4 Bolt Down Bracket Kit (purchase from www.newenglandarbors.com or
a retailer of our products)
Refer to bolt down bracket instructions for hardware requirements,
as they pertain to your application:
If mounting pergola onto an existing concrete surface:
• 1/2“ x 3 1/2” x 12“ Wood Shims (32)
• 1/4” x 2 3/4“ Cement Screws - Countersunk Head (12)
• 3/16” Concrete drill bit. Minimum 3“ long (1)
If mounting pergola onto a wooden/composite deck with
AN ACCESSIBLE UNDERSIDE:
• 1/2“ x 3 1/2” x 12“ Wood Shims (32)
• 1/4” x ?“ Bolts and Nuts - Countersunk Head (12) (Length depends on
blocking material)
• 1/4” Washers (12)
• 1/4” Wood drill bit. Minimum 3“ long (1)
If Mounting Pergola in Ground
L.
4x4x8 Pressure-Treated Wood Posts (4) (purchase at local building center)
M. Concrete Ready Mix (4) (purchase at local building center)
Tools You Will Need
• Level
• Hammer
• Tape Measure
• String Line
• Wood Stakes (4) (temporary support for string line)
• Step Ladders (2)
• Cordless Drill
Tools You May Need
• Circular Saw with Fine Tooth Blade
• Framing Level
• Framing Square
A
B
C
M
CONCRETE - Ready Mix
Not to Scale
6
6.5 x 6.5 Flat Top Pergola
Purchase Separately
Purchase Separately
Purchase Separately at:
www.newenglandarbors.com
Purchase Separately
J
L
K
D
www.newenglandarbors.com