Installation Guide

14
Cardiff Pergola Instructions
STEP EIGHT (CONT’D)
Lock the outer two shade slats onto the rafters using a 1 1/2 in (38 mm)
screw for each intersection between the shade slat and rafter as
shown. A total of 10 screws will be required for this step.
3
3
Install the remaining shade slats - at 9 1/2” (24.13 cm)
spacing between them - ONE BY ONE
(i.e. place one shade slat and lock it to the rafters).
Do not attempt to place all the shade slats before locking
them into the rafters as this will be difficult to accomplish.
4