Instructions / Assembly

Fastening End & Post Caps
Install decorative pergola end caps using vinyl weld.
Install the post caps.
Final position your post trims.
1
2
3
STEP SEVEN
2
To position post trim in place:
1. Slide the post trim down.
2. Apply a generous amount of vinyl glue around the post
3. Slide the post trim back up to the desired location and
allow a few minutes for glue to cure.
3
1
To glue pergola end in place:
1. Apply a generous amount of vinyl glue to the pergola end as shown.
2. Slide the pergola end into the beam/rafter and allow a few minutes
for glue to cure.
14
12 x 24 Flat Top Pergola