Project Ideas

STEP FOUR

Attach Canopy

Navigate the canopy between the retainer bar and the end rafters

and over the pergola as shown. A helper would be required.

Attached the second set of pipe together (80” & 46½”) and insert

into the opening at the end of the canopy as shown.

Notes:

1. Canopy can be adjusted by first ‘pushing’ up on the one end

and pulli

ng down on the other end (or use a helper).

2. To remove canopy, simply remove the steel insert from one

end and slide the canopy out.

12 x 12 Flat Top Pergola Canopy