Project Ideas

STEP ONE
5
Follow steps ONE through SEVEN as per the 12 x 12 Flat Top Pergola
instructions. Your pergola should look like the illustration below:
STEP T WO
Connect the two pipes (80” and 55½” - the longer of the two shorter
ones).
Continue to assemble the retainer bar by connecting the two retainer
extrusions and coupler with the pipe assembly inside as shown.
Fasten all the pieces together by using four of the provided screws.
Note: Ensure that the steel pipe is not protruding out of either end.
The steel pipe might need to be pre-drilled using the drill bit
provided with your pergola hardware.
Repeat for second retainer.
Assemble Retainer Bars
1
2
3
4
1
2
3
12 x 12 Flat Top Pergola Canopy