Installation Guide

Turn Bar Holder Installation
1
1
2
STEP EIGHT
21
12 x 12 Flat Top Louvered Pergola
The Turn Bar Holder is packaged in box 7 kit and is
designed to provide a place to keep the Turn Bar when not in use.
Pick a location that is easily accessible and out of the way of the
louvers operation. The post is recommended as the 2 1/2” (64 mm)
screws are used to protrude into the wooden post, providing a secure
mounting support.
Mount with the slot on the top and closer to the post as shown.
Fasten with two 2 1/2” ( 64 mm) screws provided.
Hang the Turn Bar as shown.
3
2
Slot on the top and
closer to the post.
3