Installation Guide

North America Toll Free Phone: [phone]
www.wearevita.com
5
4
STEP TWO
With a helper, carefully lower the rail fence assembly into the holes.
Using blocks of wood or something similar, place the rail fence
assembly such that it is approximately 4” (10.2cm) off the ground
as shown.
Backfill holes with excavated dirt and check for level.
Note: For a more permanent installation, you may choose to
use concrete instead of dirt. Follow the instructions on the bag
of concrete and backfill each of the holes accordingly.
Pressure fit the three post caps onto the posts as shown.
Rail Fence Installation (Continued...)
3
4
3
Blocks of wood