Owner`s manual

OWNER CONTROLS-A control panel accessible by pressing the Vita-Mix logo.
• Press once to reveal the mode message. Press button 1 then 6
within five seconds to continue. Once the correct code is entered the
display will indicate the motor temperature (Norm, Warm, Hot), a
usage count and a total. The ‘count’ is a machine usage total and
can be reset. This can be used to keep a count of the number of
drinks sold in a week, day or even an hour. To clear, press and hold
the START/STOP button for 5 seconds. The ‘total’ keeps track of
the machine usage, including production and testing, and cannot
be cleared.
• Press twice to reveal the name of the program controlling the
PRE-SET buttons. If you are using the factory settings this will read
VITA-MIX BASIC PROGRAM.
• Press a third time to reveal an option to reset the PRE-SET buttons
to the original factory settings.
• Press a fourth time to exit and continue blending.
HIGH/LOW PULSE button - The pulse provides a quick increase or decrease in speed
of the blades when blending. Press H to increase the motor to speeds that range from
51%-100%. Press L to decrease the motor speed down to a range of 50% -7%. The PULSE
button will override the running program (as long as it is depressed). Once released the
original program continues its cycle.
• The PULSE high(H) and low(L) speed is set by using the SPEED CONTROL buttons.
To set, while pressing and holding a PULSE button, press the SPEED CONTROL ▲
or ▼ button until the desired motor speed is reached. The PULSE speed will remain
at this setting until changed again with the SPEED CONTROL buttons.
M
ODE
TEMP COUNT TOTAL
NORM 25 100
VITA-MIX BASIC
P
ROGRAM
4 TO OVERWRITE
CURRENT PROGRAM
5