Owner`s manual

How to operate your Blending Station

using the

six Pre-Set Programmed Buttons.

The following is the basic factory settings of the six PRE-SET buttons (your machine’s PRE-

SET buttons may differ due to program revisions or if your Blending Station was programmed

specifically for your business).*

• Button 1: (:15) Blends thin drinks with just juice and ice. This program will quickly

ramp to a high blending speed for 15 seconds.

• Button 2: (:20) Blends light coffee drinks. Button 2 will ramp the blending speed to

medium for six seconds and ramp up to high for 14 seconds.

• Button 3: (:32) Creates a specialty drink with a thick viscosity. Button 3 runs at a

medium speed, ramps down, then increases to high speed, and finishes the drink at

medium speed.

• Button 4: (:34) This cycle is good for ice cream and regular coffee drinks that need a

little longer blending. Button 4 increases to medium speed for four seconds then ramps

up slowly to a high speed for 14 seconds.

• Button 5: (1:35) Blend a regular smoothie for an extended cycle. Button 5 runs for

45 seconds on a medium speed and then increases in speed and runs on high for

50 seconds.

• Button 6: (:25) Blend thick frozen fruits & hard ingredients for a thick but consistent

smoothie. Button 6 gradually ramps up the blending speed, maintaining intermediate

speeds and gradually progressing until it reaches full speed.

1. Place liquids and soft foods in the machines container first, solid items and ice last. Prepare

food by cutting or breaking into 1-3 in. (2.54 -7.62 cm) pieces. Frozen fruit, especially, should

be as small as practical. Thawed or partially thawed fruit is recommended. We recommend

PROGRAMMED button #5 or #6 for heavy-duty blending.

2. Set the container on the motor base by aligning it over the centering pad anchored to

the base. (Motor must be completely stopped before positioning container).

Containers are not to be used for hard, dry materials. Avoid running the Blending Station

with container empty.

3. Always use a lid when blending. If blending hot ingredients, the lid must be securely in place.

4. Select desired programmed setting by pressing any of the Pre-Set Buttons one through six.

The machine will begin immediately to cycle through the selected program, and turn off

when the program is complete. Each button has a different pre-selected combination of

speed and length for blending.

NOTE: If you detect a change in the sound of the machine or if a hard or foreign object

comes into contact with the blades, do not serve the drink. Inspect your blade assembly for

loose, knicked or missing parts. If parts are loose, missing or knicked replace with a new blade

assembly. (See page 22).

nstructions

*Your machines PRE-SET PROGRAM buttons function and times may be different then described in the

owners manual due to your machine being custom programmed.