Owner`s manual
Table Of Contents
- Support Information
- Overview
- System Requirements
- Before Using the Program
- Getting to Know the Program
- How to Program a Blender
- Saving Blending Programs
- Printing/Viewing Blending Programs
- Appendix A: Installing the Software
- Appendix B: Working with the Programmer Module
- Appendix C: Programming a Blender with a Programmer Chip
24
© Vita-Mix Corporation – How to Program a Blender
To Erase a Module:
a) Insert a Programmer Chip into the Programmer Module (see
Appendix
B: Working with the Programmer Module for details).
b) Select
Erase Module.
c) The following dialog box will displayed.
d) Remove the Programmer Module from the blender Programmer Port.
How to Program a Blender(
continued)
d) Finally, press and hold the #4 Button until the DISPLAY WINDOW
reads RESTORING PLEASE WAIT.
e) The PRE-SET buttons are now reset to the original factory settings.
For Vita-Mix blenders with no digital displays:
a) Turn the power to the machine OFF using the ON/OFF switch.
b) Hold down the PULSE button while turning the power back on using
the ON/OFF switch.
c) The pre-set programs are now reset to the original factory settings.
NOTE: Blenders can also be programmed by selecting Program
Blender from the Module Menu.
*