Owner`s manual
Table Of Contents
- Support Information
- Overview
- System Requirements
- Before Using the Program
- Getting to Know the Program
- How to Program a Blender
- Saving Blending Programs
- Printing/Viewing Blending Programs
- Appendix A: Installing the Software
- Appendix B: Working with the Programmer Module
- Appendix C: Programming a Blender with a Programmer Chip
22
© Vita-Mix Corporation – How to Program a Blender
To Program a Blender: see page 23.
To Load from a Programmer:
a) Insert the Programmer Module firmly into the blender Programmer Port.
The words, THIS SIDE FACING TO THE FRONT OF THE
MACHINE must be facing you. NOTE: Reference the product Owner’s
Manual for the exact location of the Programmer Port.
b) Select Load from Programmer.
c) The following dialog box will displayed.
d) Remove the Programmer Module from the Programmer Port.
To Load from an External Module:
a) Insert a Programmer Chip firmly into the Programmer Module (see
Appendix C: Programming a Blender with a Programmer Chip for
details).
b) Select
Load from External Module.
c) The following dialog box will displayed.
d) Remove the Programmer Chip from the Programmer Module.
NOTE:
Store the chip in its original packaging when not in use.
How to Program a Blender(
continued)
In the Module Menu