Owner`s manual

Table Of Contents

How to Program a Blender(continued)

9. Enter a button title in the button title field.

slider handles ramp speed segments

If programming

Vita-Mix

Blending Stations,

skip to Step 11.

10. Edit the power setting for the PRE BLEND segment, using either of the

following methods:

a) enter a numeric value in the

power field.

b) click on the gray handle in the slider field and hold the left mouse button

down while moving the slider up or down with the mouse.

11. Edit time, ramp and power settings for blending segments A-D.

NOTE: It is not necessary to use all available segments.

Perform the following steps for each segment to be programmed:

- Enter the segment time (seconds) in the

segment time field.

NOTE: the combined total of all segment times (SEGMENTS

A-D) will be displayed in the

total program time field.

- Set the ramp speed by clicking on the desired ramp speed segment or by

moving the slider handle with the mouse.

- Edit the power setting for the segment, via any of the following:

a) enter a numeric value in the

power field.

b) click on the gray handle in the slider field and hold the left mouse

button down while moving the slider up or down with the mouse.

c) click on the desired value in the slider field.

12. Repeat Steps 6-11 for each button to be programmed.