User`s manual

F. Select Use the following IP address, and type the IP info in the fields.
Figure 53
2. Replace the router or server that can assign the IP addresses through DHCP in a LAN.
GV-Hot Swap DVR V2 won’t turn on.
If your GV-Hot Swap DVR V2 won’t turn on or you don't hear a startup sound or any fan or drive noise,
try these steps:
1. Make sure that you switch on the AC power on the rear panel.
Off
On
Figure 54
2. Make sure that the power cord is properly connected to both the GV-Hot Swap DVR
V2 and power
outlet. If you are using a power strip, make sure that the strip is powered on.
3. If the problem persists, consult your dealer.
44