User`s manual

Getting Started
3
3.8 Extended Installation
Beyond basic installation, the GV-Hot Swap DVR V2 package provides the following accessories to
make your unit even more powerful and convenient:
z GV-Keyboard
z IR-Remote Control
z RJ-11 to DB9 Cable for PTZ control
GV-Keyboard
The GV-Keyboard is designed to operate the GV-Hot Swap DVR V2 exclusively. Using the USB cable
supplied with the GV-Keyboard, plug one end into the GV-Keyboard and the other end into the
assigned USB port (COM3) on the front of the GV-Hot Swap DVR V2; you can operate the Keyboard
immediately without installing any drivers.
For details on the GV-Keyboard, find the Installation Manual included in its own package.
Figure 33
It is also possible to plug the Keyboard into other USB ports of the GV-Hot Swap DVR V2. For this, you
must modify the default COM port on the Multicam Controller pop-up once the Keyboard is connected.
See Figure 34-1.
29