User`s manual

Getting Started
3
3.7 Configuring an IP Address
The purpose of configuring an IP address is to support the remote monitoring, control and configuration
of the GV-Hot Swap DVR V2 over a network connection.
The GV-Hot Swap DVR V2 is enabled for DHCP network. An IP address will be automatically allocated
when the GV-Hot Swap DVR V2 is powered up. Despite the DHCP setting, it is recommended that a
static IP address be configured on the unit.
The GV-Hot Swap DVR V2 uses Windows operation system to configure an IP address. For this, you
must exit to Windows.
Note: Exiting to the Windows operation system is a protected feature. The default ID and Password is
“0000”.
Exit to Windows
1. Exit the main screen to display the GV-Desktop screen.
Figure 30 Exit the main screen
2. Click the Settings button, and enter the valid ID and Password to display the Settings dialog box.
3. Under Desktop Type, select Windows from the drop-down list, and click OK.
4. Click the Log Off button, and enter the valid ID and Password to display the Windows desktop.
27