User`s manual

3.6 Replacing the Hard Drive

You can replace the hard drive in the Hot Swap Drive Bay without shutting down the GV-Hot Swap DVR

V2.

1. Do not press the Power button to turn off the power.

2. Turn the safety lock to the OPEN position (see Figure 10).

3. Push the safety lock. The drawer handle pops up.

4. Lift the handle, slightly pull out the drawer and wait until the hard drive spins down.

5. Pull out the drawer completely, remove the hard drive, and then mount a new one.

6. Put the drawer back in the drive bay.

7. Push the drawer handle back, and turn the safety lock to the LOCK position.