User`s manual

Getting Started
3
Chapter 3 Getting Started
3.1 Basic Installation
Basic installation describes all the equipments required to program and operate the GV-Hot Swap DVR
V2.
Figure 6
1. Using the supplied power cord, connect one end to the AC input and the other end to the power
outlet.
2. Connect the keyboard to the PS/2 input.
3. Connect the mouse to the PS/2 input.
4. Using the VGA cable supplied by the monitor manufacturer, connect the VGA monitor.
5. For video lost beep, connect Speakers to the Audio Line Out port.
6. Using the RJ-45 cable, connect one end to the Ethernet port and the other end to Network.
7. Using the BNC video cables, connect one end to the BNC connectors and the other end to video
sources.
8. Using the supplied D-type audio cables, connect one end to the audio ports and the other end to
audio sources.
Note: The monitor you use must be capable of having a screen resolution of 1280 x 1024 and display
color of 32 bits.
13