User`s manual

User’s Manual

www.dynacolor.com.tw

5.8.3 Export Configuration >

The Administrator is allowed to save a unit configuration by exporting it to an

external drive, such as a USB Flash Drive. Before exporting the configuration,

make sure the device in which the configuration will be saved is attached to

the unit appropriately. Select <Export Config> from the Configuration menu

and press ENTER. The following menu is displayed.

Export Config

1. Copy Destination

2. Config Name

3. Begin Export

Items in this menu are described in the following sections.

5.8.3.1 Copy Destination >

Select this item to list available destinations (external memory devices) to

which the configuration can be exported. Press UP / DOWN to set a

destination. Please note that saving a different configuration to the same

copy destination with the same file name will overwrite the previous

configuration file without warning.

NOTE: The DVR doesn’t support CD-RW as a copy destination.

5.8.3.2 Configuration Name >

This item allows user to assign the exported configuration file a name. Use

the virtual keyboard to enter the configuration file name. Note that the file

name can contain up to 15 characters, with no spaces.

5.8.3.3 Begin Export >

Select <YES> to begin exporting the configuration file, or <NO> to abort the

export.

NOTE: We strongly recommend users to export configuration before

upgrading your system, and back it up routinely, just in case for

unexpected situation.