User`s manual

User’s Manual

www.dynacolor.com.tw

5.6.4.2 Video Loss Detect >

This item allows user to enable / disable Video Loss as an alarm event.

Select <ON> to enable Video Loss alarm events, <OFF> to disable. The

default setting is <ON>.

5.6.4.3 Motion Detect >

Use to enable or disable the motion detection function of the DynaGuard

100 MPEG-4 DVR. By default, the value is <OFF>.

If motion detection function is enabled, it is required to define the motion

detection parameters such as detection area and sensitivity settings.

5.6.4.4 Detection Configuration >

If motion detection function is enabled, it is required to define the motion

detection parameters such as detection area and sensitivity settings. Select a

channel for setting the parameters, move the cursor to <Detection Config>,

and press ENTER. The Detection Configuration menu displays as follows.

Detection Config

1. Detected Area Setup

2. Sensitivity

3. Area Threshold

75%

60%

----- Detected Area Percentage -----

40%

▲