User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
62
5.4.2.2 Weekend Schedule >
The Weekend Schedule determines whether a weekend schedule is in effect.
Choose <YES> to take effect the related weekend settings.
5.4.2.3 Weekend Start / End >
The Weekend Start Time indicates the specific day and time that a weekend
begins, for example, FRI 18:00. The Weekend End Time indicates the
specific time and day that a weekend ends, for example, MON 06:00. Time is
indicated in 1-minute increments.
Note that the value you have set indicates when the regular Day and Night
scheduling ends, and Weekend recording begins.
5.4.3 Preset Record Configuration >
The <Preset Config> is used to select the preset recording quality and frame
rate. Different default recording quality levels are offered for user to choose:
<Best Quality>, <Standard>, <Extended Record>, <ezRecord >, <512Kbps
DSL>, <256Kbps DSL> and <128Kbps DSL >.
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate
(PPS) and recording size for each channel in the table below.
These preset conditions override any other quality and rate settings. The
default Preset Configuration setting is <Standard>.
Record Mode: Full-D1 mode (NTSC: 720×480@30PPS) (PAL: 720×576@25PPS)
Preset
Configuration
Normal
PPS
Normal
Size
Event
PPS
Event
Size
Event Active
Best Quality
3.75 NTSC
(3.125 PAL)
20 KB
15 NTSC
(12.5 PAL)
20 KB
Both
(Alarm+Motion)
Standard
(Default)
3.75 NTSC
(3.125 PAL)
14 KB
15 NTSC
(12.5 PAL)
20 KB Both
ezRecord Auto Auto Auto Auto Auto
Extended
Record
3.75 NTSC
(3.125 PAL)
8 KB
15 NTSC
(12.5 PAL)
20 KB Both
512Kbps DSL
3 NTSC
(3 PAL)
3 KB
3 NTSC
(3 PAL)
3 KB Both
256Kbps DSL
3 NTSC
(3 PAL)
2 KB
3 NTSC
(3 PAL)
2 KB Both
128Kbps DSL
3 NTSC
(3 PAL)
1 KB
3 NTSC
(3 PAL)
1 KB Both